2600 Boot-Up Config File Problem

[Koji]

When I boot the 2600 the IOS loads correctly from flash. However, it then tries to load a config file from a tftp server and displays the message for each config stuck in memory:

%Error opening tftp://255.255.255.255/2600.cfg (Timed out)

My question is how do I configure the router not to load any configs from tftp (as it is not available any more)

I have cleared NVRAM and chaged the boot register and recopied config to memory. Any Ideas?

Koji

 

[xlee]

Go in config mode and type in: no service config

 

[jeter]

Is there a line in your config that looks like this.

boot host tftp filename ip address

if so go aheadand remove it. Make sure your reg is 2102 Jeter@LasVegas.com
J.Fisher CCNA

 

[Koji]

Xlee, the "no service config" worked like a charm, thanks. I was rackin' my head trying to figure what the command would be. That one didn't come to mind!

Koji