Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2514 for T1

Status
Not open for further replies.
ecafracs

ecafracs

IS-IT--Management
Aug 21, 2002
93
PH
hi guys! I have a query here. Is the 2514 serial interface capable of handling T1 connection speed. I am planning to replace our 2600 router with my 2514 router as a failover device, just in case the 2600 device goes down.
 
Sort by date Sort by votes
Yes, the Serial ports on a 2500 series router handle full T1 speeds. The only disadvantage is that you would need an external CSU/DSU.... unless the 2600 is already running off of an external CSU/DSU. Anyways, hope this helps.

Burke
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
456
jarod_paris
jarod_paris
B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
242
badwolf1686
B
disk-us
  • Locked
  • Question
RTU licensing for a901
Replies
0
Views
213
disk-us
disk-us
Willi DB
  • Locked
  • Question
Polycom410 Forward an incoming call
Replies
0
Views
252
Willi DB
Willi DB
MoJHK
  • Locked
  • Question
UAT for Cisco C9200
Replies
0
Views
206
MoJHK
MoJHK

Part and Inventory Search

Sponsor

Back
Top