Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

200 Icp non prime number going out on PRI

Status
Not open for further replies.
chelmik12

chelmik12

Technical User
Joined
Oct 26, 2010
Messages
17
Location
CA
I am trying to Display a non prime extension to the outside world but the outgoing always follows the prime number CPN number any thoughts?
 
Sort by date Sort by votes
System and software release will help. there are a couple of ways to do it depending on software level.
 
Upvote 0 Downvote
oops, ignore that i just noticed the 200icp, not sure on that one...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

idahomitel
  • Question Question
SIP/PRI SX 200 ICP Dividing channels for different trunk groups
Replies
14
Views
447
idahomitel
idahomitel
idahomitel
  • Locked
  • Question Question
SX 200 ICP CFNA and xfer problems
Replies
18
Views
2K
The mitel guy
The mitel guy
idahomitel
  • Question Question
Assigning static ip address sx200 icp 5340
Replies
2
Views
184
idahomitel
idahomitel
syscon411
  • Locked
  • Question Question
SX-200 MX password
Replies
14
Views
1K
The mitel guy
The mitel guy
Crowtalks
  • Locked
  • Question Question
finding non-prime broadcast numbers MiVB 8.0
Replies
3
Views
457
kwbMitel
kwbMitel

Part and Inventory Search

Sponsor

Back
Top