2 VPNs to same network

[chieftan999]

If I haave 2 VPNs going to the same network, 1 VPN comes up okay but the second does not, is this due to the router showing the one route to the network? To get both working together do I need to use route mapping or somethinglike that?

Reamin positive. The affect on those around you will amaze.

 

[chieftan999]

I will re word this question.

At 1 end I have 2 ADSL Connections. These go to 2 WAN Interfaces on the 2811 router. This goes out of the FA LAN Interface to a layer 1 device (HUB) and then the bonding box. When information is sent from the remote network we want to utilise both ADSL lines. Because this also needs to be load balanced with the bonding boxes we need to send the traffic out of both interfaces. This means using a route map.....what is the best way of achieving this result?

Thanks in advance

Reamin positive. The affect on those around you will amaze.