2 Operators on a Call Pilot? 3

[warnp]

I have a MICS at a Doctor's office that I have extended to another site with MCK's. Is there a way with a Call Pilot to set up 2 operators so that each site can have it's own? Thanks for any info in advance.
Warnp

 

[RikRodgers]

What, specifically, are you trying to do?

You could assign a ans dn to the distant ext to ring both at the same time...

 

[exsmogger]

If you're referring to the dial 0 option you can have a different attendant for each greeting table. You can also set each mailbox for a different target attendant, which is the dial 0 option from subscriber mailboxes.

Brian Cox

http://www.jandjcommunications.com

 

[Phonehed]

Exmogger is correct! Give that man a star!

Phonehed in Dallas

 

[fireeater]

don't forget the direct dial in the phone system (for that finishing touch)


All Things Are Possible With Time And Lots And Lots of Money

mike

http://www.ics-on.ca

 

[warnp]

Basically they have several main numbers(800's etc.) that ring to one Greeting table. Followed by CCR giving an option for one site or the other and then a series of menus. They want to set up one site so that when 0 is dialed through the mail box it goes to a specific extension and then at the other site have those mailboxes go to a different extension. I know I can set up an extension as the attendant for the voicemail in general and I saw where I could set up an alternate extension in the mailbox programming but where do I set up a 0 destination for each individual mailbox?

 

[exsmogger]

That's called your target attendant. Login to each mailbox, press the ADMIN button, press 5 to set the target attendant for that mailbox.

Brian Cox

http://www.jandjcommunications.com