Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
1XP App Connects but...
- Thread starter voxvar
- Start date
ipowarrior
Programmer
what do you mean?
you opened one-x portal and "nothing works"?
are you using IE9?
you opened one-x portal and "nothing works"?
are you using IE9?
- Thread starter
- #3
Does it call you when you try to dial anything?
Try *17 and see what happens.
Open monitor and have a look.
BAZINGA!
I'm not insane, my mother had me tested!
www.lantel.nl
Try *17 and see what happens.
Open monitor and have a look.
BAZINGA!
I'm not insane, my mother had me tested!
www.lantel.nl
ipowarrior
Programmer
ah ok, what is the ipo dialing back to the droid on? sip trunk?
- Thread starter
- #6
amriddle01
Programmer
Indeed, there's a whole lot of SIP Tx but no Rx ....you aint getting any traffic back 
- Thread starter
- #9
hairlessupportmonkey
IS-IT--Management
wrong source ports -
Via: SIP/2.0/UDP 192.168.4.199:26509;
your router needs to make sure the NAT rule is extendable - I.E it fixes the source port rather than creating a random one.
ACSS - SME
General Geek
Via: SIP/2.0/UDP 192.168.4.199:26509;
your router needs to make sure the NAT rule is extendable - I.E it fixes the source port rather than creating a random one.
ACSS - SME
General Geek
hairlessupportmonkey
IS-IT--Management
I suspect thats why you dont see any return traffic on the IPO
ACSS - SME
General Geek
ACSS - SME
General Geek
- Status
Similar threads