Hello,
Please can anyone help?
I am having a major problem with my new 1721 router, I cannot seem to get the adsl connected correctly or anything actually going to or from the internet. If I check the sh int dialer0 its up, as is the atm0, but I am not sure if I am actually connected or not. I am only trying at the moment to connect one of the two wic 1 adsl modules. Still waiting for the other adsl line, then line bonding....Help....:0
kind regards
Scorptc
Here is a copy of my config:
!
! Last configuration change at 22:45:41 Europe/ Wed May 12 2004
! NVRAM config last updated at 22:45:52 Europe/ Wed May 12 2004
!
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname scorp
!
logging queue-limit 100
logging buffered 51200 warnings
enable secret 5 xxxxxxxxxxxxx
enable password 7 xxxxxxxxxxx
!
username xxxxx privilege 15 password xxxxxxxx
clock timezone Europe/London 0
clock summer-time Europe/London date Mar 30 2003 1:00 Oct 26 2003 2:00
ip subnet-zero
no ip source-route
no ip routing
!
!
!
!
!
!
!
interface Null0
no ip unreachables
!
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
hold-queue 224 in
!
interface ATM1
no ip address
no ip route-cache
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
interface FastEthernet0
description $FW_INSIDE$$ETH-LAN$
ip address 10.0.0.1 255.255.255.224
ip access-list 1
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip route-cache
speed auto
half-duplex
!
interface Dialer0
description $FW_OUTSIDE$
mtu 1430
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxxxx
ppp chap password 7 xxxxxxxxxxx
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http access-class 1
ip http authentication local
!
!
access-list 1 remark HTTP Access-class list
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 10.0.0.0 0.0.0.31
access-list 1 permit any
access-list 100 remark VTY Access-class list
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 10.0.0.0 0.0.0.31 any
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
!
line con 0
line aux 0
line vty 0 4
access-class 100 in
privilege level 15
password 7 104606170116011B5E
login local
!
scheduler allocate 4000 1000
end
Please can anyone help?
I am having a major problem with my new 1721 router, I cannot seem to get the adsl connected correctly or anything actually going to or from the internet. If I check the sh int dialer0 its up, as is the atm0, but I am not sure if I am actually connected or not. I am only trying at the moment to connect one of the two wic 1 adsl modules. Still waiting for the other adsl line, then line bonding....Help....:0
kind regards
Scorptc
Here is a copy of my config:
!
! Last configuration change at 22:45:41 Europe/ Wed May 12 2004
! NVRAM config last updated at 22:45:52 Europe/ Wed May 12 2004
!
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname scorp
!
logging queue-limit 100
logging buffered 51200 warnings
enable secret 5 xxxxxxxxxxxxx
enable password 7 xxxxxxxxxxx
!
username xxxxx privilege 15 password xxxxxxxx
clock timezone Europe/London 0
clock summer-time Europe/London date Mar 30 2003 1:00 Oct 26 2003 2:00
ip subnet-zero
no ip source-route
no ip routing
!
!
!
!
!
!
!
interface Null0
no ip unreachables
!
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
hold-queue 224 in
!
interface ATM1
no ip address
no ip route-cache
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
interface FastEthernet0
description $FW_INSIDE$$ETH-LAN$
ip address 10.0.0.1 255.255.255.224
ip access-list 1
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip route-cache
speed auto
half-duplex
!
interface Dialer0
description $FW_OUTSIDE$
mtu 1430
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxxxx
ppp chap password 7 xxxxxxxxxxx
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http access-class 1
ip http authentication local
!
!
access-list 1 remark HTTP Access-class list
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 10.0.0.0 0.0.0.31
access-list 1 permit any
access-list 100 remark VTY Access-class list
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 10.0.0.0 0.0.0.31 any
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
!
line con 0
line aux 0
line vty 0 4
access-class 100 in
privilege level 15
password 7 104606170116011B5E
login local
!
scheduler allocate 4000 1000
end