1712 Router and WIC-1ENET

[yemaya]

Hi Guys,

I just bought one WIC-1ENET for my 1712 but my router doesn't recognize the ethernet port, i tried differentes wic cards and they worked but not this WIC-1ENET, any idea what do i have to do ?.

This is what i got with sh diag cmd:

Router#sh diag

Slot 0:        
        Unknown Port adapter, 1 port        
        Port adapter is analyzed         
        Port adapter insertion time unknown        
        EEPROM contents at hardware discovery:        
        Hardware Revision        : 1.1        
        PCB Serial Number        : FOC08082C06        
        Part Number              : 73-8969-01        
        Board Revision           : B0        
        Fab Version              : 04        
        Product (FRU) Number     : Unknown        
        EEPROM format version 4        
        EEPROM contents (hex):          
       0x00: 04 FF 40 04 48 41 01 01 C1 8B 46 4F 43 30 38 30
       0x10: 38 32 43 30 36 82 49 23 09 01 42 42 30 02 04 FF
       0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
       0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
       0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
       0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
       0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
       0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

I'm running adventerprisek9-mz.124-8

Thanks in advance.

 

[burtsbees]

First off, what other WIC cards has it recognized---other WIC-1ENET cards? Also, what do you mean that it does not recognize it? On boot, do the boot messages state that there is an unknown card in WIC slot one? And where did you get this WIC? Was it brand new, or used, advertised as out of a working router?

Burt

 

[yemaya]

Hi.

Sorry for the delay, i bought this card in ebay and i believe comes from china, i tell the guy and he sent me another one and the same problem, here is what i got :

Router#sh ver
Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)
Technical Support: [URL unfurl="true"]http://www.cisco.com/techsupport[/URL]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 18-Nov-06 13:47 by prod_rel_team

ROM: System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)

Router uptime is 15 minutes
System returned to ROM by power-on
System image file is "flash:c1700-k9o3sy7-mz.124-11.T.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
[URL unfurl="true"]http://www.cisco.com/wwl/export/crypto/tool/stqrg.html[/URL]

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco IPM (MPC862P) processor (revision 0x101) with 89494K/8810K bytes of memory.
Processor board ID FOC08082C06 (3591649292), with hardware revision 0000
MPC862P processor: part number 7, mask 0
1 FastEthernet interface
1 Virtual Private Network (VPN) Module
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#

Router# sh diag
Slot 0:
        Unknown Port adapter, 1 port
        Port adapter is analyzed 
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 1.1
        PCB Serial Number        : FOC08082C06
        Part Number              : 73-8969-01
        Board Revision           : B0
        Fab Version              : 04
        Product (FRU) Number     : Unknown
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 04 48 41 01 01 C1 8B 46 4F 43 30 38 30
          0x10: 38 32 43 30 36 82 49 23 09 01 42 42 30 02 04 FF
          0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Slot 3:
        Virtual Private Network (VPN) Module Port adapter, 1 port
        Port adapter is analyzed 
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 2.1
        Part Number              : 73-4586-02
        Board Revision           : C0
        Deviation Number         : 0-0
        Fab Version              : 03
        PCB Serial Number        : FOC09271HNP
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : MOD1700-VPN=
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 01 79 41 02 01 82 49 11 EA 02 42 43 30
          0x10: 80 00 00 00 00 02 03 C1 8B 46 4F 43 30 39 32 37
          0x20: 31 48 4E 50 03 00 81 00 00 00 00 04 00 FF FF FF
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Router#

Any idea what is the problem?.

Thanks in advance.

 

[burtsbees]

Try switching the VPN module with the WIC-1ENET and see if it then recognizes the enet card, but not the VPN. The IOS is plenty good and up to date---a very slight possibility it's corrupt. I'd bet you have a screwed up WIC slot. Actually, plug the enet card where the VPN mod is, but do not plug the VPN mod in the other slot, power it on, see if it works, then keep the enet card in and plug the VPN mod in.

Burt

 

[Minue]

Hello
If you haven't already tried!Put the "WIC-1ENET" in Slot 0 of the router.
Regards

 

[burtsbees]

Minue---the error occurs when he does this---look at the "sh diag" output---it shows the unknown WIC in slot 0!

burt