Search results for query: *

Make sure you do not have the auto-login feature enabled.

My apologies for giving the wrong load....it has been a while

Ld 17 CHG TYPE: OVLY ENTER ENTER ENTER ---UNTIL YOU GET TO "DROL" there you can X35

Thanks John. I am using analog trunks as overflow for my PRI's. I had not seen the error before and when I stat the trunks of that route, the come up idle. DOn't know what to make of it.

Hello friend, Anyone with experience with this type of an error..."short hold". I know it can be changed but before I do so, if someone can elaborate if possible... Thanks

Are you accessing your App Builder from the programs menu or a short cut from manager?, the reason why I ask is because I was told that Nortel advises that you access App Builder needs to be accessed only from Start-->all programs-->App builder otherwise, you get a not so desirable result (crash)

If I may John, you need to be logged in with pw2 for that. Just a clarification for the poster.

I believe (although it has been a long time), you need MNL in the class of service

And you can also send that user a message across your pbx (to get out of the overlay for instance)

try a phantom TN and DCFW to callpilot

you have fdn on a phantom TN...the key feature in Phantoms is DCFW....please clarify

You bailed me out GTROUT, you deserve TWO.

Got it...Thanks for all your help

Followed the direction to a T but unfortunstely it did not work. I dial the DISA DID and get a secondary tone, then ##** and followe by SCPW, then I dial my ext and DO NOT hear a dial tone, few seconds, I get re-order tone. Does NCOS, TGAR have anything to do with it?...thanks

GHTROUT, thank you very much friend. I will give it a shot and see what happens.

Friends, It is becoming increasingly necessary to allow people to remote call forward phones. I do realize that DISA is necessary. Does anyone have the exact process needed to do this. I tried to look at the NTP's and could not get a clear picture. Thanks in advance

Friends, It is becoming increasingly necessary to allow people to remote call forward phones. I do realize that DISA is necessary. Does anyone have the exact process needed to do this. I tried to look at the NTP's and could not get a clear picture. Thanks in advance

check the signalling on the T1. Both ends must be eith AMI D4 or B8ZS/ESF.

Is this an analog circuit or digital? for example, is it wired to a 66 or a 110 block or does it ride a T1 via a DLIC card in your BT box?

Thank you friend...will test and report back...Thanks again