Search results for query: *

Hey Mike have you check your Nortel Patches. I had a similar Problem with my CS100 that calls would not connect to My BCM's. The Nortel Site might help.

Thanks bkrike that got it.Nortel dude

What is the paging pair on a Mics

You didn't say what type of Option you have 11c thru 81c.The conf/tds will usually be in your 2 slot on an 11.But if you have a different option will still need to disable the conf/tds loop first. Try printing the CEQU in ld 22 and find out where your conf cards are located

SBC has been doing this for many years. With GPS I might add. They address Emergencies by having a Designated Tech on call as well as a Warehouse person. The Tech's rotate the on call

Sorry I meant LHK 3

I think your last hunt key is set to LHK 2. Try setting this to LHK 2. See if this works.

Sorry the rls level of software is 23.31

I need to change the T-1's in my option 11c to PRI's. I know I will have to add a daughterboard to accomodate a D channel but what are the software requirements or packages.

Johnpoole may be right. Nortel and Avaya are night and day. Thanks telecomtekperson but all seventeen slots are in use. I found that I need to remove tne T-1 card and do a board renumber that solved the problem. Thanks again. Norteldude

Thanks Guy's. I did a board re-number and it took. Thanks again Norteldude

I have a T-1 card in slot 13 of a full blown Merlin Legend. I need to replace it with a 400 E & M card. I can't delete the T-1 card. What's the correct procedure for this. NortelGUY

I have full blown avaya legend. I am attempting delete slot 13 which is a T-1 card and install a 400 E&M card in its place. What is the correct procedure?

No a 5200 series or 5300 gets dialtone from a DMS 100 or above.

From past experience I don't think there is Voice- Mail on the system but the link has been configure in software.

Thank you Dlesap. I got it working. Thanks again norteldude

I need help configuring a BCM and a SRG module. I cannot ping the Server. I have a problem between the BCM and the SRG. Thanks in advance. AL

I am in the process of installing a bcm equipted with a SRG module. It's at Purdue U. has anyone done this before.

I am trying to configure a T-1 to use a Eicon Diva Server,this is suppose to connect to my Meridian 81c and will be used for outgoing faxes. Has anyone done this. Please help. Norteldude.

Glenntim, Good ole com dev not my favorite modem but here goes. If you have a laptop and hyperterminal call you modem number and if it answers press your spacebar. If you still can't talk to the modem type the word--transparent you should see a list of menu commands. If not the modem is a lost...