Search results for query: *

I am new to AIX and would appreicate any pointers as to how to partition and mirror two disk,install patches.

My /etc/system has all the entries.I have installed the 5.1 MP1 and 5.1 MP2 and still the server contiunes to reboot itself.

This is a new system with 9 recommended patch cluster applied.This system acts as the backup server.But since I stopped netbackup two days ago,there has not been any system panic and the server has not rebooted itself.I have not applied any specific netbackup 5.1 patches on this server.Could...

I have V480 running Solaris 9 and Netbackup 5.1.The server reboots itself many times during day.Has anyone have an idea what might be causing this problem?.Thanks

Many thanks to Huebs for your assistance in getting Netbackup working.All you pointers were very helpful.Thanks again.

I am trying to setup RMAN on Oracle 10g with Netbackup 5.1 on Solaris 9?.Any pointers are appreciated.

The drives are up.We are using the FC420 fibre channel bridge and it is not configured.Also with respect to client installation,.rhosts on clients are to populated with the master server name.After that what should I do next?

$ modinfo | grep -i tape 40 1382e6e 13144 33 1 st (SCSI tape Driver 1.229) And all those patches are installed.An update, one of the power supplies is bad and on a reboot the library is stuck at initializing drive 2. Support folks will by on Monday.Thanks for your assistance so far.

The tapes and disks are zoned together and the L100 is set to ptp instead of fabric.Would these factors contribute to this issue?.

# ls -al /devices/pci@8,600000/SUNW,qlc@2,1/fp@0,0 total 4 drwxr-xr-x 2 root sys 512 Feb 10 10:03 . drwxr-xr-x 3 root sys 512 Jan 28 17:21 .. crw------- 1 root root 230, 8 Feb 10 10:03 sg@w2100001086115474,0:raw crw------- 1 root root 230, 9...

# luxadm probe No Network Array enclosures found in /dev/es Found Fibre Channel device(s): Node WWN:500000e010a61e70 Device Type:Disk device Logical Path:/dev/rdsk/c1t0d0s2 Node WWN:500000e010a61500 Device Type:Disk device Logical Path:/dev/rdsk/c1t1d0s2 Node...

# dmesg Thu Feb 10 10:37:16 EST 2005 Feb 10 09:57:12 storage mpxio: [ID 669396 kern.info] /scsi_vhci/ssd@g600c0ff00000000007fedc2988371200 (ssd2) multipath status: optimal, path /pci@8,600000/SUNW,qlc@2/fp@0,0 (fp1) to target address: 216000c0ff87fedc,3 is online. Load balancing: round-robin...

There is no output in /dev/rmt/*

# cfgadm -al -o show_FCP_dev c3 Ap_Id Type Receptacle Occupant Condition c3 fc-fabric connected configured unknown c3::2100001086115474,0 med-changer connected configured unknown c3::2100001086115474,1...

This is the output: # devfsadm -C -c tape # pkginfo -l | grep SUNWsan PKGINST: SUNWsan # cfgadm -al -o show_FCP_dev Ap_Id Type Receptacle Occupant Condition c1 fc-private connected configured unknown...

Sun HBA's.I still do not have any output in /dev/rmt

Thanks for your assistance.My problem is still unresolved.My server was built with the end-user option and I have checked for QUS drivers for Solaris 9 on this server and none was found.Could this be one my problems or don't they matter?.If they matter,what other pkgages should I install to...

I have netbackup installed on V480 running Solaris 9.When I execute:/usr/openv/volmgr/bin/sgscan all conf -v /dev/sg/c0tw2100001086115474l0: Changer: "ATL M2500 3.07" /dev/sg/c0tw2100001086115474l1: Tape (???): "HP Ultrium 2-SCSI F49Z" : NOT-IN-ST-CONFIG-FILE...

The docuement will be use by group memebers new to the system

I am writing a standard operating procedure for a solaris environment.Does anyone have any pointers as to the format and what should be included in it.