Search results for query: *

Hi We eventually passed this to Sun and at first they said they would change the system board with the latest OBP. Then we got an email from another Sun engineer, see below: Checking the explorer i notice the following in the etc/system: "set rlim_fd_cur = 128" Why the errors: It means the...

Hi Thanks for the advice. The problem was due to a network error, nothing to do with the server. Someone messed up with cabling switches, trunking etc. I should have known it wouldn't be the server. Thanks again for the posts. Regards Janis

Hi Morefeo There are no NFS mounts on this server. We have one ethernet card and bge0 is configured. From reboot messages: bge0 registered bge0: link down (initialized) bge0: link up 100Mbps Full-Duplex (initialized) I was speaking to our Network guy and he thinks there may be a problem with...

Hi We have a Sun V210 showing errors in the messages file. Can anyone shed some light on what it is telling us? We applied the cummulative patches on Feb 13, but no other changes were made to the server. SunOS sunlegato 5.10 Generic_127111-06 The message file shows these errors: May 8...

Hi We are having problems booting to single user on a V240 server running Solaris 10. The messages which appear on the console are: init: Could not duplicate legacy template - bad file number init: Could not duplicate startd template - bad file number init: Could not duplicate process bundle -...

We are testing sftp but when we tried to send a file to our remote site this error appeared: unable to initialize mechanism library [/usr/lib/gss/gl/mech_krb5.so] xmalloc: zero size lost connection We checked for similar errors and a suggestion was to add the following lines to...

Hi daFranze I have just installed another FC tape library, a Scalar i500. The two FC tape drives are zoned in the fabric and I created a zone for the server so it could see the drives. This has worked perfectly and Solaris has assigned the device paths /dev/rmt/2cbn and 3cbn to the drives...

Hi bombcan I have just installed another FC tape library, a Scalar i500. The two FC tape drives are zoned in the fabric and I created a zone for the server so it could see the drives. This has worked perfectly and Solaris has assigned the device paths /dev/rmt/2cbn and 3cbn to the drives. This...

Thank-you Franz, We are having ongoing discussions with EMC about this problem, I have tried your suggestion. One thing I've noticed is that the Physical path of the devices in luxadm is as follows # luxadm inq /dev/rmt/2cbn INQUIRY: Physical Path: /devices/pci@9,700000/lpfc@2/st@2,0:cbn...

Thanks 605. Have posted a query on the Solaris forum to see if anyone can assist. Bye SuperJan

Hi We are having a wee problem configuring the FC tape drives for Legato Networker on our Sun servers. I have already posted my query on the Networker forum and have been told it may be a Solaris OS or driver problem. When I run "inquire" on one of our servers I can see the 4 LTO3 drives...

Can anyone help us configure FC tape drives on our Solaris 8 and 9 servers? We are running Networker version 7.3 We cannot see the device paths of the drives using "inquire". We have run lus_add_fp_devs, the drives show up but not the paths. Persistent bindings are OK. The drives are not shown...

Hi, Has anyone out there configured an EMC CDL300 disk library using Commvault Galaxy? We will use the CDL as a virtual tape library rather than a mag-lib. We are having problems with Commvault talking to the CDL. Any help would be appreciated. Thanks in advance Superjan

Hi, Has anyone out there configured an EMC CDL300 disk library using Commvault Galaxy? We will use the CDL as a virtual tape library rather than a mag-lib. We are having problems with Commvault talking to the CDL. Any help would be appreciated. Thanks in advance SuperJan

The solution was to upgrade the version of Powerpath.

Hi, We upgraded from Solaris 8 to Solaris 9 last week. We had a problem with the Emulex HBAs and the PGX64 graphics card and the solution was to upgrade Schizo ASIC to version 2.4 or later, so we had to replace the motherboard. The upgrade completed succesfully, but now we cannot mount the...

Ok now problems fixed. Commvault sent a patch sol_5.0.0B38_398 which fixed the issue with SAP ID limitation of 16 characters. We also upgraded BR*Tools to version 6.20 Brbackup and Galaxy are working like a dream. Bye SuperJan

Hi, Is anyone out there using the Galaxy iDataAgent for Sap R/3? We installed it last week, but are having a few problems. Just wondered if anyone has configured brbrackup to use Galaxy. Thanks Janis

Thanks for your advice....spot on When the EMC engineer arrived on-site for the CX upgrade he said I could have DMP and Powerpath running as long as they were access different devices. The CX700 is in and the V880 can see the san. Thanks for taking the time to respond. Regards Janis

Hi, Upgrading our CX600 to CX700 this weekend. I am also adding a Sun V880 server, running Veritas Volume Manager 3.2 on the internal disks to our SAN. I was told that I would have to disable DMP if I was going to use Powerpath. Never done this before.....any advice on what to look out for...