Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mgraval

    VPNRemote Phone 2.3 Looses talk path and disconnects after a fixed period of hours

    I had this same problem for years, and the best way to fix it is to ditch the 46xx series VPN phones and upgrade the 96xx series phones. Avaya stopped developing new firmware on the 46xx series VPN phones for a reason, something like 8-9 years ago. I have replaced most with 96xx and haven't had...
  2. mgraval

    Random slow data transfer speeds on 46XXSW Switch ports

    simreal, Thanks for your reply, My SET PHY1STAT is set to 5.
  3. mgraval

    Random slow data transfer speeds on 46XXSW Switch ports

    We have approx (400) 4610SW and 4620SW phones in our main location. We have a single connection to our HP Pro Curve switches, and the PC's plug into the switch port of the phone. We utilize separate Voice and data VLAN's. Certain random users are have been complaining about slow network speed...
  4. mgraval

    VPN Phone Issue IKE Phase 1 No Response

    IKE Phase 1 No Response errors indicates an authentication problem from the VPN Concentrator. Did you register the serial number of the phone into the concentrator?
  5. mgraval

    9640 - soft keys disappears during 2nd call

    Arrow down twice, you will see the Hold Softkey. Stupid, but true.
  6. mgraval

    Cannot change File Server address to program VPN Remote phone

    All of a sudden, I cannot interrupt the boot process (* to program) and change the File Server Address to point the phone to a TFTP server that I have set up with VPN Remote firmware to convert the phone to a VPN phone. I can change the address, but once the phone reboots, it ignores the entry I...
  7. mgraval

    How to get out of LSP mode

    Telnet to the MG's, login as Root and at the # prompt type configure and then at the next prompt, type RESET MGP, The Media Gateway will reset and connect back to it original CLAN, if the link is ok
  8. mgraval

    How to know IP address of my server

    list node-names will also give you a list of all your IP's
  9. mgraval

    AVAYA....Give us a ring group with more than 8 members...Pleeeeease!!

    I don't think anyone is disputing your points. The problem is you have these managers who want a HOTLINE for everything, but do not want their people tied to a desk answering phones all day, so we as the phone professionals are expected to pull off small miracles by finding a solution to allow...
  10. mgraval

    AVAYA....Give us a ring group with more than 8 members...Pleeeeease!!

    I agree with CCLTD. While I usually applaud Avaya's feature set, you know as well as I do that most end users are "HOTLINE HAPPY" and having the option to have more than 8 stations in a Coverage Answer Group, does not seem like to much to ask. I have run into many situations where this would be...
  11. mgraval

    911 Question

    list partitioned-route-table. The PGN 1-8 across the top are the Time Of Day entries within the COR's and the Route Index number down the left hand column are the partitioned route pattern numbers. If you list your route patterns, you may see some entries starting with P, before the number, this...
  12. mgraval

    Blocking ex-lover from calling our DID range

    Create an x-mobile station: Add station XXXX' where XXXX is a non DID. Station type is 'xmobile': The xmobile type is EC500, mobility trunk group=ars, config set=1, Under cell phone number enter what ever number you want to block (Ex: 561-555-5555) use your cell phone number for testing. Set...
  13. mgraval

    46xx IP Phones commands

    Invocation Mnemonic Procedure Restrictions <Mute> 2337# ADDR IP ADDRess programming <Mute> 8439# VIEW - VIEW Phone Values & FW file versions <Mute> 767# QOS Quality Of Service Values AKA 802.1p/q <Mute> 7766# SSON Site-Specific Option No. (176=Default)...
  14. mgraval

    How Many Paging Zones Left?

    display paging loudspeaker
  15. mgraval

    Problem with 4621SW IP phone

    What do you get?
  16. mgraval

    Problem with 4621SW IP phone

    Plug in the phone and then press * to change setting when prompted, then type in the IP address of your laptop running TFTP at the file server field. You should start the TFTP service on your laptop so you can actually see the phone getting the downloads.
  17. mgraval

    Problem with 4621SW IP phone

    Is your TFTP server external or is your 87XX server acting as the TFTP server?
  18. mgraval

    going to voicemail rather ringing

    You either have to do it through Mailbox Manager, through the MSS, or through Active Directory if you have an Exchange Backend. I don't know your environment. How do you set up a new user? If they don't need Voicemail, just take out the Cover path entry on their station form and the calls will...
  19. mgraval

    going to voicemail rather ringing

    There is no voicemail box for the user. You are getting to the Voicemail, but when there is no mailbox associated with the extension that is the greeting you get.
  20. mgraval

    going to voicemail rather ringing

    Have the user press Send All Calls (SAC) to deactivate the Feature. It is that simple. Send all calls, when activated sends the calls to the first point of coverage immediately, in your case to Voicemail.

Part and Inventory Search

Back
Top