Search results for query: *

If you are being asked for a MAPI client, you must be using the Classic CIM32 version of Insight Manager.. this has been unsupported for some time. Consider updating to HPSIM available from HP.com If you wish to use the version, you will have install a version of Microsoft Outlook, this will...

check the SNMP Configuration of the server... Windows2003 locks down SNMP by default. you must configure the service to allow communication with both 127.0.0.1 and the remote host you've installed HP SIM / Compaq insight Manager

There is no way to attach external storage to BL10e servers.

I assume in trying to do this you want to create two wireless zones/areas that both can access the internet via the same connection. You may be able to get this to work. What you need to do check if the devices support bridging, this will connect thw two devices together at a MAC address...

Firstly check that you haven't enabled the XP firewall on the Wireless connnections.. By default that will stop ping and file and print sharing. You say "They currently have internet connection" by this do you mean that they can access the internet via the wireless router or is that what you...

check out www.irishwan.org I run a node in this network.. we have link that are 16kms so what you are trying to achive is do-able.. The forums on this website will get you in touch with all the people that have sont this kind of thing a few times

sounds like you haven't configured the SNMP trap destination on those hosts... (the ones that aren't notifying) You have to get all the servers sending SNMP traps to the CIM7 server e.g. set the SNMP trap destination on all the servers to ip address or hostname of the cim7 server... Then...

I suggest you post in another forum... this forum deals with Compaq Server management product... not laptop hardware

The remote deployment utility uses the Admin$ share to deploy the software... These are enabled by default on NT4 and 2000, so the issue is most likely one of these two; 1) The adminstrative shares are disabled 2) As the machine is in a workgroup you dont have admin rights to the box I'd try...

If not LONGER !! ;)

Why not simply.... 1) Stop all unnecessary services. 2) Backup the server 3) Backup server again onto different tape 4) wipe server 5) install NT again into a temp folder eg c:\NTTMP (This time remembering to create a 4Gb C drive) 6) Restore the Original configuration from the backup. a)...

Use the Compaq Management Agents applet under the control panel, this has a button which will send a test trap too the hosts specified in the host SNMP configuration. Cheers

Yes... thats its it... configure the "Trap Destination" on each on the Compaq(HP) servers to send traps to the management server (CIM7) using the Services applet under the control panel. Also remember that under the SNMP Configuration if you want to "secure" the...

You'll still be able to get alerts from the CIM7 product when traps are sent from the nodes to the CIM7 machine.... BUT all the nice things... Application Launch, Remote CSP deployment, among other things just won't work without the WebAgent €0.02

Personally, I dont rate these products much... I' assume that based on the 500Gb volume size, you are using some form of Hardware RAID controller, and as such the volume is divided across multiple disks... How will the software know where or how the data is arranged across multiple physical...

If this system is s simple disk configuration... EG no RAID / NT mirror / NT Stripe... Try removing the hard disk and inserting the disk into another Windows NT4 system, which should run a check disk on the dirty volumes. I've correct the error you've noted using this method a few times...

why not simply configure the "default user" policy with the wrong proxy address, which will affect all users Create an INTERNETACCESS domain global group. Then add the INTERNETACCESS to your policy and configure the correct proxy address for that group. that way if you want to give...

Configure the SNMP Trap destination of each managed node to send traps to the CIM7 server.... then you'll get events appearing in the CIM7 application uponn which you can perform tasks... email notification etc If you require more help please post another message ! Cheers

net user /domain USERNAME /homedir:path /scriptpath:script.bat the above should help

Changing the media type to FULL duplex is not usually supported with a HUB... are the client DHCP or static addresses ? Have you checked the WINS settings, are you using WINS ? If you run "net view" do you get a list of computers ? can you ping the server and client PC's by their...