Hello All
I have a client that has a Philips IS3030 which has an OM terminal connected via the IP port on the CPU 810. They lost connectivity after their network was upgrade and the IP range was changed. We restore the IP address issue and got both the OM terminal and CPU in the same range.
The...
Hi All
Having problems assigning Auto-Attendant option on NEC XN120.
The option we are wanting to configure is that once a call is answered by the Auto-Attendant the incoming caller has an option to dial the extension direct.
We have entered option "105=Prompt to dial extension" in the single...
Hi All
Is there anyone who could assist me in retrieving the password for the IAS Voice Announcement on my IS 3030 system.
The password was changed from the default & the person who normally administers the system no longer works for the company.
Any help will really be appreciated.
Thanks
Hi All
I have recently installed an in-switch VRS/Voicemail card in the NEC-Philips IPC100 PBX.The problem that I have is that the Message Waiting Lamp on the analogue phones only works to phones connected to the 3+8 CPU cabinet.
The phones plugged into any of the expansion cards(008 &...
Hi All
I am trying to gather technical information on the new IP DECT which NEC-Philips unified solutions has launched.
Does anyone have manuals which I can access?
Thanks in advance.
Hi all
Is there anyone that has been exposed to or has any experience in the new NEC-Philips AP200s IP DECT System.
Keen to know how this interfaces with the PABX.
Thanks in advanced.
Hi All
Is there anybody out there who can assist me with the installation & programming manuals to the NEC XN120 PBX.
I would appreciate any feedback.
Thanks
Matt
Hi All
My question relates to the DECT license on a Philips PABX.We have reached the capacity of the maximum number of handsets on our system.
Is the any way that we are able to increase this without having to purchase additional license's.
The problem that we have is that our service provider...
Hi All
Is there anyone who can assist me with the following problem?
We have a Sysmanager connected to our Philips IS3070 and recently we had a power fail which led to the PC crashing.When starting up an error message(No license available)is displayed.I have checked and found the license file...
Hello all.
Our PC running the Supervisor 60E crashed yesterday rendering our switchboard out of service.We have 2 other Sohpo supervisors 25 available which we are using but need to get the Sup60 functioning.
Our PBX service provider has quoted us the earth to restore this service and...
Hi All
I have been tasked to help setup a voice over data link on a Philips is3010.The request is for 4 ports on a DTX-I to be connected to a Cisco Router.
I am responsible for setting up the PABX and need to know what signalling group needs to be utilised on the DTX-I.Also are there any...
Hi All
I have been tasked to provide a 3rd premicell onto a KXTD1232.The problem that I have is that I am unable to get an even access distribution to allow the client maximum saving.
What happens is that the system will always access the first premicell in the group and then the other.This...
Good day all.
I am searching for the programming manuals for the PBX mentioned (Karel MS48).
I have searched the net without much luck.
Please HELP!!!
Thanks
Matt
Hi There
I recently purchased a Samsung NX308 control unit.The eprom containing the software was damaged and I would like to get a copy of the file to restore system.
Can anyone help me?
Thanks
Mat
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.