Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sopho IPC IP DECT 1

Status
Not open for further replies.

mat123

Technical User
Dec 17, 2003
33
0
0
ZA
Hi all
Is there anyone that has been exposed to or has any experience in the new NEC-Philips AP200s IP DECT System.
Keen to know how this interfaces with the PABX.

Thanks in advanced.
 
Hi.
Ip dect can connect to Is3000 via ITMP of SIP,
to 2000IPS and SV7000 via Protims and other systems via SIP.

 
Hi
Thanks for the reply cooldude6.Do you know whether one can connect it to the NEC-Philips IPC100 range of PBX's?
 
When you say connect are you refering to other pabxs, ie 3000 range or the GUI to connect,???
 
Hi All/Escaliber
I am refering to connecting to the Sopho IPC100 PBX.
The AP200S IP DECT system is very new in our country and I am having difficulty finding technical information on configuring the PBX to accomodate the DECT solution.
Any help will be greatly appreciated.

Thanks Matt
 
Matt,

Did you succeed in redirecting the phonecalls of the IPC100 PBX to the AP200S IP DECT system? I am still trying to figure out how to do this, but it is almost a black box with the limited amount of documentation available.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top