Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: bflowers
  • Content: Threads
  • Order by date
  1. bflowers

    We have a user with a Cisco VoIp ph

    We have a user with a Cisco VoIp phone - model 7942 who states that when she receives a call, puts the caller on hold, receives a 2nd call, and puts them on hold as well, she can not retrieve either on-hold caller. She also states that this is an intermittent issue. Does anyone have experience...
  2. bflowers

    VoIP Hotdial Feature programming

    Is anyone familiar with programming the Cisco Hotdial feature (PLAR) to a directory number in CUCM 11.5? Thank you. Bflowers
  3. bflowers

    Unity Voicemail Configuration

    Is it possible to set how many messages individual useres can receive in Unity Voicemail, or is it simply a system setting that fits everyone? Thank you for any information. BFlowers
  4. bflowers

    We are using Cisco VoIp and are hav

    We are using Cisco VoIp and are having problems getting the call-forward-all feature to work. When the softkey is pressed, we hear silence, which I assume is the time allowing me to enter the destination DN I want the calls to forward to. As soon as I hit any numerical key on the phone, I get...
  5. bflowers

    Hi; Our company is converting to U

    Hi; Our company is converting to Unity viocemail, to be used in conjunction with Cisco IP phones that are scattered throughout various locations, some of which are a three hour drive from the offide. I have successfully built call handlers and with the caller inputs. I can record a greeting...
  6. bflowers

    Migrating from Innovation Elite to Cisco Unity Voicemail and need to Find a feature

    Our old voicemail system had a menu feature where you could enter a sequence of extension numbers pompts in order from 1 through 9. We will be rolling out Cisco Unity Voicemail as a replacement. Is there a similar feature in unity voicemail, and if so, what am I looking for? Thank you...
  7. bflowers

    QSIG

    How do I know whether or not our F9600 M PBX with release 11 software is licensed for QSIG? Bflowers
  8. bflowers

    TLOG/S Help Needed

    I've searched every Fujitsu manual we have looking for the key that explains how to read the auxiliary info for the TLOG and TLOGS commands without success. Anybody know where to find the info? Trying to nail down an intermittent power failure that happens for a few minutes every day. We've...
  9. bflowers

    Reliability Evaluation

    We currently use Cisco 79XX series phones in our VoIP network, which have reached end-of-life/end-of-support. We are looking at the Cisco 7800 and 8800 series phones as replacements. Please share reliability information about these phones, good and bad. We are leaning toward the 8800 series...
  10. bflowers

    Minimum Shlefe Config

    What is the minimum shelf load for a Fujitsu F9600 ES (single, one shelf cabinet) including the ability to communicate through a maintenance console (MAC terminal) Thanks. BFlowers
  11. bflowers

    Cisco Unity, Can it supoprt Multiple Tennants.

    Does Cisco Unity support multiple tennants, adn if so, can one of them be used to provide voicemail to a legacy Fujitsu PBX? BFlowers
  12. bflowers

    Dual Use Desktop for Fujitsu PBX

    We have a DOS computer with two com ports for one of our Fujitsu F9600 sites, that we are installing to replace a bad PC. We're using com port 2 to connect directly to the PBX, and are trying to use com port 1 to connect to a modem so that we can dial into other PBX sites through the modem...
  13. bflowers

    Connectiong Cisco Call Manager to Bogen ZPM3 pager module and amplifier.

    We are trying to connect a Cisco Switch port, controlled by Cisco Call manager, to a Bogen ZPM3 overhead paging module. We have tried connecting FXS ports programmed as Loop Start, POTS, and Ground Start configurations. When the Directory Number is dialed, the port sends ring voltage. We have...
  14. bflowers

    PRI Port Selection

    We have an F9600 M connected trough pri-lines to a Cisco VoIP network. Is there a way to determine which order PRI ports are used by the PBX when a call is made from an on-campus phone to a VoIP phone? Bob Flowers
  15. bflowers

    F9600 Model Identification

    We are looking at a used Fujitsu F9600, hopefully, model M. What are the defining physical characteristics of the M verses an XL? I need to verify the PBX model. BFlowers
  16. bflowers

    NIght Mode

    I can't seem to find the procedure to activate and deactivate the night mode feature for the F9600 platform. Any help would be appreciated. BFlowers
  17. bflowers

    Cisco VoIP Forwarding

    I have a customer who wants to forward their Cisco 7911 VoIP phone to an in-house 7941. They can forward from their extension to one extension,in the building, but not to another. I have looked at the calling search space, the Route Partition, the device pool, and every other field in both the...
  18. bflowers

    DND Accross FIPN

    I don't have a clue what AI did, but somehow, we can no longer set DND to forward calls from our location to any 5-digit extension starting with the digit - 5. It forwards across FIPN with DND to 5-digit extensions beginning with 2. I've been fighting this for about 7 hours now. I need help...
  19. bflowers

    Fujitsu F9600 connection to ShoreTel VoIP.

    We have successfully connected teh F9600 PBX with the Shoretel Switch. However, it's phones are able to call the Fujitsu PBX netwrok phones, but not vice versa. I have broken out the 7 digit extension numbers in the Fujitsu PBX numbering plan. I don't know what the Distant Office Code is, or...
  20. bflowers

    Fujitsu F9600 connection to ShoreTel VoIP.

    We need the correct pin-out for the connection cable between a Fujitsu F9600 PBX FIPN/PRI card to a ShoreTel VoIP switch. Any help would be appreciated. Thanks.

Part and Inventory Search

Back
Top