Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dual Use Desktop for Fujitsu PBX

Status
Not open for further replies.

bflowers

Technical User
Jul 28, 2011
42
0
0
US
We have a DOS computer with two com ports for one of our Fujitsu F9600 sites, that we are installing to replace a bad PC. We're using com port 2 to connect directly to the PBX, and are trying to use com port 1 to connect to a modem so that we can dial into other PBX sites through the modem connection. The on -site PBX connection is working flawlessly, but I am unable to connect to the modem. Does anyone know the DOS commands that will allow me to use ProComm Plus to communicate through the modem to other sites?

Thank you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top