Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dannyyo

    When iSCSI SAN box 2 is added to the network

    I'm somewhat new to setting up an iSCSI SAN box. So currently I've setup 2 new VLANS to enable MPIO on the 10GB NICS as shown in the picture (colored blue). My question is if I added another SAN box to the network (yellow) with MPIO again, do I need 2 additional separate VLANs or can I just...
  2. dannyyo

    NIC teaming with Cisco 3750 Switch

    I configured my windows 2003 Storage Server with NIC teaming at the device level and configured the cisco 3750 switch for LACP. It's set up identicl to this (http://ramazancan.wordpress.com/2011/08/06/how-to-configure-nic-teaming-with-hp-proliant-and-cisco-or-procurve-switch-infrastructure/)...
  3. dannyyo

    Change from Fiscal Year to Calendar Year in GreatPlains 2010

    First of all thank you for the quick response. I have read a about the option 1 and 2 that you speak of, however no one mentioned anything about any related issue this may cause in the long run? I don't work in accounting, and I only work with GP only when I have issues to deal with. Are...
  4. dannyyo

    Change from Fiscal Year to Calendar Year in GreatPlains 2010

    Our company is planning on changing from Fiscal year to Calendar year. How do I plan this out. I read a lot of docs on how to do it, but when is the best time to do this? Here's the current fiscal periods 2014 => 4/1/2013 to 3/31/2014 (open) 2013 => 4/1/2012 to 3/31/2013 (closed) 2012 =>...
  5. dannyyo

    Greatplains Purchase Order Printing - Add "legal statement" to backside of every PO being

    Is there a way to modify the PO report in Greatplains 2010 to print a "legal statement" on the backside of every PO page being printd? We already have a duplex printer, so we are half way there. But I'm not sure how to go about adding a text box in which section of the PO report to have the...
  6. dannyyo

    Upgrade from GP 9.00.0281 to GP2010

    klewis10367, did you install sql 2005 and gp 9 onto a 64bit windows server? If so which version of windows?
  7. dannyyo

    Upgrade from GP 9.00.0281 to GP2010

    Do I install GP 2010 after the SQL has been upgraded the way you suggested klewis10367?
  8. dannyyo

    Upgrade from GP 9.00.0281 to GP2010

    Does anyone have an easy guide or steps to upgrade to GP2010 from GP 9.00.0281? On a test server, I installed windows 2008 r2 standard, sql 2008 r2 standard ed., then I imported the databases from our production gp which has the sql 2005 std on windows 2003 std. After that I installed GP 10...
  9. dannyyo

    Exchange 2010 DAG for HA vs CA HA

    We currently have exchange 2007 std running in our environment. We've been researching High Availability and we are leaning toward the CA's HA software solution. The other option would be to migrate to Exchange 2010 std and implement DAG. But this would require more time to implement. Has...
  10. dannyyo

    Help setting up autodiscovery on Exchange 2007

    from the client machine are you able to ping autodiscover.reipf.com? and what does nslookup autodiscover.reipf.com tell you?
  11. dannyyo

    Implementing CCR on existing Exchange 2007 Sp2 Std.

    Thanks for your confirmation. I am going to have to look at the exchange 2010 upgrage path along with DAG. If I stayed with Exchange 2007, is there a third party software that you can recommend, that'll provice HA. I've looked at WanSync from XOsoft and Double Take about 2 years ago, but it...
  12. dannyyo

    Implementing CCR on existing Exchange 2007 Sp2 Std.

    We currently have Exchange 2007 SP2 Standard edition runnin on Windows 2008 Enterprise server. We currently have LCR, but we don't think it's a sufficient DR. So we looked at SCR and tested it, but have not implemented it. Now we are looking into implementing CCR, so that it'll truly be DR...
  13. dannyyo

    VLAN

    we have Cicso Catalyst 3750G. There's 2 locations connected via T3 lines going into a Adtran's Netvanta 5305 routers. Behind the routers are the 3750G switches adjacent to the Netvanta router and further out connected via fiber are more 3750g switches. I just need to add one device to the far...
  14. dannyyo

    VLAN

    yes but in order to let vlan 2 to talk to vlan 1, wouldn't I need to enable routing on the switch?
  15. dannyyo

    VLAN

    We currently have a flat LAN. I do not want to convert the whole network to VLAN. We have all cisco switches all throughout the company. If I need to plug in one device to one of the ports to control access via access list, do I need to convert the whole netowrk to VLAN? I just want to make...
  16. dannyyo

    Telrad T3 Emagen voicemail with Iphone

    We have a Telrad phone system with T3's Emagen voicemail system. When we receive faxes through the voicemail, it gets emailed to our exchange '07 mail server. On outlook you receive the fax as pdf and it's viewable. But on a user's Iphone all you get is a question mark. I know the problem is...
  17. dannyyo

    After Transitioning to Exchange 2007 from 2003; how to remove 2k3?

    Couple of things that made this simple proccess so difficult in our environment. 1. After the replication was all said and done, we created a new "Public Folders Container" then dragging the old "Public Folders" in to this new "Folders". Read http://technet.microsoft.com/en-us/bb288905 and...
  18. dannyyo

    After Transitioning to Exchange 2007 from 2003; how to remove 2k3?

    Why even replicate the public folders if I am not going to be using them anyways? I don't really have anything in the public folder besides free/busy and calendar, which no one really uses. Do I have to replicate the folders anyways? Also, I discovered this morning that as soon as I delete...
  19. dannyyo

    Exchange 2007 gives (0x8004010F) : for all users

    We got this error on both outlook 2k7 and 2k3. When I clear the tick on "cached mode" and restarted outlook, then put the tick back, it resolved it on the 2k7. I also right clicked on the OAB and "updated" it and it resolved it. However, I couldn't resolve it for the outlook 2k3 clients.
  20. dannyyo

    Information Store and Transport Service Not Started after reboot

    Here's the reg fix that I used. http://technet.microsoft.com/en-us/library/cc756342(WS.10,printer).aspx I made servicespipetimeout= 60,0000 milliseconds and it resolfed the issue. How funny is that SP2 messes it up couple of services for sure in 100% of my 5 test runs. Oh well, at least they...

Part and Inventory Search

Back
Top