Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ChrisAC

    BGP: Two locations Same ASN

    Yes. ********************** Chris A.C, CCNA, CCSA **********************
  2. ChrisAC

    blank screen in hyperTerminal when booting cisco router

    And your hyperterminal settings are??? ********************** Chris A.C, CCNA, CCSA **********************
  3. ChrisAC

    Changing switch IP address using Hyperterminal

    If you are adding it to a switch stack then you really should wipe it's config completly (wr erase / erase start). It will then join the stack as a stack member and take the config from the master. Chris. ********************** Chris A.C, CCNA, CCSA **********************
  4. ChrisAC

    NAT and Public IP on same interface?

    ...have a public /26 but you are just NATing traffic to the outside /30 address! What you need there is a firewall which would handle all your NAT, *or*, put the public /26 on a loopback interface and then just have the internal range on your Fa0/1 interface, NATing your traffic to your public...
  5. ChrisAC

    E3 interface configuration question

    4) Bytes (not bits). Chris. ********************** Chris A.C, CCNA, CCSA **********************
  6. ChrisAC

    How to stop terminal monitor

    term no mon ********************** Chris A.C, CCNA, CCSA **********************
  7. ChrisAC

    cisco router

    From a clinet PC can you dig or nslookup any DNS server? When you do, do you see NAT translations on the router? Have you tried logging any drops on the acls? errr ... no! Chris. ********************** Chris A.C, CCNA, CCSA **********************
  8. ChrisAC

    ISP failover and DNS

    You would need to manually change the DNS settings so that hostnames map to address space on your other ISP. Regards, Chris. ********************** Chris A.C, CCNA, CCSA **********************
  9. ChrisAC

    Routing problem?

    And this isn't really the correct forum for routing issues. Chris. ********************** Chris A.C, CCNA, CCSA **********************
  10. ChrisAC

    Routing problem?

    ...73] 11 12 ms 13 ms 12 ms interconnect1-gig2-0.kingston.fixed.bt.net [194. 72.3.68] 12 26 ms 26 ms 26 ms 195.171.57.38 13 * * * Request timed out. 14 * 195.171.57.38 reports: Destination host unreachable. Trace complete. Chris...
  11. ChrisAC

    Mail server routing in PIX

    Try posting your config? Chris. ********************** Chris A.C, CCNA, CCSA **********************
  12. ChrisAC

    Resetting a router WITHOUT entering privilaged EXEC mode?

    http://www.cisco.com/en/US/products/hw/routers/ps233/products_password_recovery09186a0080094795.shtml ********************** Chris A.C, CCNA, CCSA **********************
  13. ChrisAC

    IOS download

    ...connected to that router, how exactly were you planning to do it over a console cable? If you are close enough to attach a console cable, then you are close enough to patch lead into the ethernet port and do it properly. Chris. ********************** Chris A.C, CCNA, CCSA...
  14. ChrisAC

    IP Route for single IP Addresses

    Where are you trying to trace to? 68.75.10.12? Chris. ********************** Chris A.C, CCNA, CCSA **********************
  15. ChrisAC

    IP Route for single IP Addresses

    68.75.10.12 255.255.255.255 Chris. ********************** Chris A.C, CCNA, CCSA **********************
  16. ChrisAC

    IOS download

    ?? If the router has an IOS on it then why not connect a PC / laptop to it via ethernet, set up a port and download the IOS over TFTP? Chris. ********************** Chris A.C, CCNA, CCSA **********************
  17. ChrisAC

    ADSL types

    ADSL is standard Asymetrical DSL (upto about 8Mbps). ADSL2 and ADSL2+ is just faster ADSL (upto about 24Mbps)and ADSL Max is just a marketing term for standard ADSL upto 8Mbps services. Chris. ********************** Chris A.C, CCNA, CCSA **********************
  18. ChrisAC

    IOS download

    http://www.cisco.com/warp/public/130/xmodem_generic.html ********************** Chris A.C, CCNA, CCSA **********************
  19. ChrisAC

    routing issue with pix 501

    ...and then route off that to your other network then it won't work. The Pix is NOT a router. Any traffic entering the inside interface must exit via another interface. It will not route traffic back out of the inside. Chris. ********************** Chris A.C, CCNA, CCSA **********************
  20. ChrisAC

    DNS records for mysite.com ???

    www.mysite.com IN A x.x.x.x eg. www.tek-tips.com. IN A 216.45.19.33 Chris. ********************** Chris A.C, CCNA, CCSA **********************

Part and Inventory Search

Back
Top