Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Redistributing default static route into RIPv2
Hello, I have two routers connected to a vlan, which also has a firewall connecting the network to the Internet. Both the routers and the firewall are running RIPv2. Now, one of the routers has a static default route pointing to the firewall interface. That router is also reditributing that...- abidg
- Thread
- Replies: 2
- Forum: Technical certification and testing
-
Book(s) for CCIP - QoS Exam
Thanks Lerdalt. I will surely consider your recommendation. Just one thing before I go for it - has it got lab based scenarios and configuration examples. Regards. _______________________________________ Courage does not always roar. Sometimes, it is the quiet voice at the end of the day...- abidg
- Post #3
- Forum: Technical certification and testing
-
Book(s) for CCIP - QoS Exam
Hello, I am about to start with my CCIP-QoS preparation and was wondering about the best book for this purpose. I came across the QoS Exam Certification Guide (2nd Edt) but was not sure as I have found these exam certification guides to skim on essential elements of any technology/solution. I...- abidg
- Thread
- Replies: 4
- Forum: Technical certification and testing
-
ExtremeNetworks: XFP, XFP and XENPAK
Hello Guys, I need to figure the difference between the following module types: 1) SFP. 2) XFP. 3) XENPAK. I believe the difference would be in terms of speed and optical/electrical forms but still wanted to be sure. Thanks and regards, Abid _______________________________________ Courage...- abidg
- Thread
- Replies: 1
- Forum: Extreme Networks networking solutions
-
Help when purchasing a new router.
Just one thought or word of caution. Why only one router? What about resilience? I would have thought of getting two routers for HA. _______________________________________ Courage does not always roar. Sometimes, it is the quiet voice at the end of the day saying, "I will try again tomorrow"... -
Peering across p2p or LAN for RIP
I have to peer two CEs with two other C (internal customer routers over RIPv2 as follows: C1 C2 | | | | CE1---C2 CE2----C1 C1--------C2 : already in place Peer: CE1 with C1 and C2 Peer: CE2 with C1 and C2 C1... -
Redistributing RIPv2 into BGPv4
I have a customer solution requiring mutual redistribution between RIPv2 and BGP, for resilience. I have used distribute-list on both in and out directions to avoid routing loop. R1----------RIP------------R4 | | RIP RIP |... -
Routing protocol peering with HSRP Virtual IP and Virtual Router
Hello Minue, I have end up in a situation on a production network where I have to multihome a customer network with service provider using BGP. It is an MPLS solution and the service provider wants to use BGP for PE-CE. The reason I was testing peering with HSRP is that the customer is using... -
BGP Policy Routing
Hello Belushi - I have done some testing with route-map and distribute lists. With both of these you need to use ACLs or as you said (set/match) communitties. Using communitties in my limited experience might not be much different then using tags. I have a feeling that using either tags or... -
Routing protocol peering with HSRP Virtual IP and Virtual Router
Hello, I tried to run RIPv2 on a LAN in between 3 routers, where R1 and R2 were in an HSRP group, and R3 was the other physical router. What I noticed was R3 would use the physical addresses of R1 and R2 instead of the virtual IP address on the HSRP standby group. I even tried the... -
Redistributing RIPv2 into BGPv4
Yup I know it is free but what I was thinking that as this is the sole resource one has access to during the lab, I could get myself into the habbit of using it and getting to know it better. Anyways will do with the online one instead. -
Redistributing RIPv2 into BGPv4
I meant documentation about this specific feature of redistributing default route from IGP into BGP. Again, you could be right as I might not have been looking in the right place. Any chance I could purchase this set of doc on DOC-CD or Product/Technology Support Page? I guess not !! -
Redistributing RIPv2 into BGPv4
Thanks Cluebird. Just wondering why BGP does that and why isnt this fact well documented in Cisco docs - atleast I couldnt find it in quite a few Cisco press and web site resources. There has to be a reason for this. Not that I am trying to be too nosy but just that am interested in finding... -
Redistributing RIPv2 into BGPv4
This is what I have found to be: Internet gateway <--- R1---(RIP)---R2---(BGP)--- R3 (200.1.1.0) 1)redistribute static under RIP and a default route on R1 If network 0.0.0.0 statement given under R2: propatates a route to 200.1.1.0 and a default route as well under bgp across to R3 If... -
Redistributing RIPv2 into BGPv4
I have noticed one more thing: on R1 if i set a default route pointing out to the Internet interface, and set the network 0.0.0.0 command under RIP on R1 - this propagates a route the Internet interface [200.1.1.0] throughout RIP on both R2 and BGP on R3. -
Redistributing RIPv2 into BGPv4
Hello, I am trying to redistribute RIPv2 into BGP on the following test topology. (200.1.1.0)Internet<----------R1-----------R2-----------R3 R1 and R2 - Running RIPv2 R2 and R3 - Running BGPv4 R2 - Redistributing RIP into BGP and vice versa. R1 - has the Internet connected to it - hence is... -
Stateful HA IPSec
I am using c3725-advipservicesk9-mz.124-23.bin Am not sure if this feature is supported on 3725 as according to feature navigator it should not be. -
Stateful HA IPSec
Hello ISPKing - right after I posted this thread, I thought of checking this feature's avability. I think it is only supported on 7200 and a few other high end platforms. I was trying it on 3725s and in another instance on 2921s. I found this via Cisco feature navigator. Will try it out on... -
Stateful HA IPSec
Hello, I am using the following configuration to test an HA IPSec with stateful failover. This config only includes "redundancy", "ipc" and "HSRP" config, that also from one of the two routers. It does not include an IPSec related config. Problem is when I disable or disconnect the Active HSRP... -
BGP Policy Routing
Hello Belushi, In my case imagine that I have an AS cloud with two point of connections with the service provider AS. __ Intranet Routers __ |_________()__________()__________()___| | Core | | Cutomer Network |...
