Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. donnaleezeller

    Ewiley: Follow-up Secaucus router

    Both routers are up and running...camera is viewable from the Web server...thanks for your assistance. PS: It was the IP Routes and a couple of other issues that you mentioned that we should check.
  2. donnaleezeller

    Ewiley: 2600 Router Issue - lights on/off

    I'll try to do this on Tues/Wed. The Gloucester router was set up and connected by someone else. Even then, the Secaucus Serial Interface was up/down (Serial plugged into the data center port and the router) and the Ethernet Interface was up/down (Ethernet not plugged into any port - just...
  3. donnaleezeller

    Ewiley: 2600 Router Issue - lights on/off

    1. Unplugged the T1 from the Hub in Gloucester. 2. The T1 in Secaucus is plugged directly into a data center port. 3. Question: What about the Secaucus router: Is that serial down/down because of the Gloucester router? Or, are there other things that I need to correct in Secaucus too?
  4. donnaleezeller

    Ewiley: 2600 Router Issue - lights on/off

    Question 1: What is the correct light on/off setting for the CD, AL and LP lights - when everything is working what should they be ? Question 2: Everything is plugged into a hug switch: LinkSys Model EZXF88W - it is an 8 port hub - everything else plugged into that hub works just fine.
  5. donnaleezeller

    Ewiley: 2600 Router Issue - lights on/off

    Secaucus Router: 1. The lights on/off are as follows: CD light = ON AL light = ON LP light = OFF Power light = ON RPS light = OFF Activity light = FLASHES 2. Router#Debug interface serial 0/0 Condition 1 set Router# Gloucester Router: 1. The lights on/off are as follows: CD light =...
  6. donnaleezeller

    Ewiley: Can you do a show service-module ser0/0 and paste it in here?

    Router #1: Router#show service-module ser0/0 Module type is T1/fractional Hardware revision is 0.112, Software revision is 0.2, Image checksum is 0x70F47262, Protocol revision is 0.1 Transmitter is sending remote alarm. Receiver has loss of frame, AIS alarm, Framing is ESF, Line Code is...
  7. donnaleezeller

    Cisco Router 2600 Series Update

    ****Response to the wiring:**** Question: When you plug your router into the T1, what lights come on? If the CD light does not come on, then your router is not getting an electrical signal from the telco. Answer: The T1 at the Secaucus NJ location is plugged directly into the Router port and...
  8. donnaleezeller

    Cisco Router 2600 Series Update

    According to the service provider, the T1 is up and running.
  9. donnaleezeller

    Cisco Router 2600 Series Update

    I won't be able to get that today...will do that on Wed...thanks for your insight. Will reply asap.
  10. donnaleezeller

    Cisco Router 2600 Series Update

    ***tschouten: Why do you have clock source internal? I have the clock source as line ***gunthnp: the no fair-queue - I believe that is the default - should I remove it?
  11. donnaleezeller

    Cisco Router 2600 Series Update

    5/19/03 Here is the config information for Router #1 - still showing as Serial down/Protocol down - according to the service provider, the T1 is up and running: Router#show interface serial 0/0 Serial0/0 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet...
  12. donnaleezeller

    Serial 0/0 is down, line protocol is down

    Reply to: donna.zeller@att.net *********************** Building configuration... Current configuration : 1034 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! enable secret 5 $1$nkMg$eyGeSo7kCi4j/Zy1 ! ip...
  13. donnaleezeller

    Windows 2000 Web Server and DMZ Interface of Firewall

    Does anyone know of an online guide to set up the following: Server (Web) on DMZ Interface of Firewall: IP: Gateway: Subnet: Allowed Protocols: IPs: (126 available) Allowed Protocols: None on firewall policy Private (DB Server) LAN on Interanal Interface of Firewall IP: /24 Gateway...

Part and Inventory Search

Back
Top