Search results for query: *

Thank you both for the two scenarios, very much appreciated :-))

Hi, I wonder if someone could point me in the right direction, I have been tasked with providing a way for an ipo voicemail pro to provide callers with an option to contact a representitive on call, however they must validate that they are allowed to do this by entering a pin. ie. caller is...

Not on mine, i have snmp and T1 either side of system tab, im using version 4.1(15)

lol no, im strugling to find the settings in monitor, im using version 4.1(15) I have turned on development logging, and then selected all items under H323. I appreciate some direction!

********** Warning: Logging to Screen Started ********** 282416mS CMCallPkt: v=0 CMSetup (Secondary) Line: type=AnalogueExtn 2 Call: lid=0 id=2 in=0 Called SubAddress[d] Calling[] Type=Unknown (0) Calling SubAddress[?²H] Pres=Allowed (0) Keypad[‘|N ‘|ìáC]...

theproviderpatched - how can i email you the config??

...lueBChan: slot=46259 chan=1132333236 lueUUI type= [.U..\r.................C~t...4.A~....\r.............C~..............C~......A~........Z.A~....*.A~\r.....C~......................] [0xa0 0x55 0x85 0x00 0x0d 0x00 0x00 0x00 0x14 0x00 0x00 0x00 0xb8 0xfc 0x18] 41416mS CMCallPkt: v=0...

akb1111 i have analogue extentions only on this unit, so no info........ im guessing its waiting for line as nothing happens!

i do not see any filter settings for sip, can you enlighten me please?

hi, i still cannot overcome this problem and am finding it difficuilt to find the time to invetigate further, does anybody know a good engineer near to milton keynes, uk i could contact??

Just out of curiosity i have my laptop patched in to lan 1, and i can ping my sip provider no problem, however my ip address is comming from my router, not ipo. When i try to ping my sip provider from the status application it fails on all three packets and shows the source as lan1 ip address...

...but nothing works! here is my latest monitor snippet 154319mS CMTARGET: 0.1005.0 1 MasterBedroom.0: LOOKUP CALL ROUTE: type=100 called_party=*9* sub= calling=202 in=0 complete=0 ses=0 154320mS CMTARGET: OUTGOING CALL ROUTE 154320mS CMTARGET: 0.1005.0 1 MasterBedroom.0: ADD TARGET (N)...

...suggestions, my provider does not support stun, but leaving the avaya defaults it sets up as Full Cone NAT. My short code is as follows; Code: *9* Feature: Dial Tel Number: "9123@draytel.org" Line Group id: 5 Locale: uk 9123 is the talking clock at my sip service dratel. Shoud i use ip...

...talking clock and then dialled it, this is the log 33072mS CMTARGET: 0.1004.0 1 MasterBedroom.0: LOOKUP CALL ROUTE: type=100 called_party=*9* sub= calling=202 in=0 complete=0 ses=0 33073mS CMTARGET: OUTGOING CALL ROUTE 33074mS CMTARGET: 0.1004.0 1 MasterBedroom.0: ADD TARGET (N)...

Bas That was from sysmonitor tool, but i cannot find a setting to enable sip in the filters?? I am using version 4.1 (15) Any ideas??

Hi baz, Yes i have read through and set up as per the example, interestingly it does also say that draytel is supported for the uk, but doesnt give setup examples and neither do draytel! The monitor snippet is; 126005mS Interface Tx: v=LAN2 LAN Ethernet Header info -...

Hi all, I have made some progress, i now have the router set as 10.0.1.1, and SOE 10.0.1.2, set routes, and can accsess internet from lan1, horah!! However having problems setting up sip trunks, folllowed various intructions but nothing seems to work, how can i tell what is causing the...

mike, sorry it now works, i hadent rebooted properly :-) Thanks for your help, now i can proceed to bttle with setting up my sip trunks.. I dont suppose you have ever setup a draytel sip before have you?? they do not provide a stun server, and im struggling with the settings!

Mike, Thanks for your reply, i have tried your route but no joy, the router is definatly 10.0.1.0, when i run ipconfig /all from my pc. Why is this not valid?? Thanks for your help..

Hi, has anybody succesfully setup draytel sip trunks, i am trying to setup on SOE I have added license but cannot get it to work, just wondered if anyone has done it and can lead me. They do not run stun server, settings; How do I set up other products for DrayTEL ? The setup of your equipment...