Search results for query: *

For anyone out there that runs into this issue... I think I have a few suggestions to try. I was finally able to do a cold import into VC BUT there are a few considerations you may want to review. 1. If you have multiple partitions and/or Disks, do not try and import everything at once. Start...

Okay sounds good.... Thanks for the response... I am going to give that a shot next... Ed

I have been trying to find the best way to migrate a Wndows 2003 Server running 2 sets of Dynamic Disks (C: - OS and D: - Data). This is setup for mirroring utilizing Windows 2003 built in software RAID. I read an article on VMware's KB stating a workaround is to break the mirrored volumes...

Okay thanks for the info and sorry about not posting correctly... I wasn't sure where to post since it I wasn't sure exactly what support I required... Thanks, -Ed-

Which adapter should I look at since this is supposed to be for the PBX systems and not needed to be used with an ATA adapter? The Konnexx adapters I have seen are for analog conference phones.... Thanks, Ed

Okay on the Adapter.... Thank for the info... I didn't order this phone but someone else did and threw it in my lap to figure out.... Go figure... Ha Ha! Thanks for your help... I will look into the adapter. Thanks, -Ed-

We have a Norstar.... -Ed-

We currently have the following listed in the software: M7100 M7208 M7310 M7324 T7316E -Ed-

I will give just 2616 a shot and see what happens..... The ICS I thought was the Software for connecting to the system... If I am mistaken, sorry... I am not much of a phone programmer... Hence why I need help! Ha Ha! Thanks again! -Ed-

Yes it is a PBX Nortel Meridian system. Thanks, Ed

I have a Soundstation2 from Polycom and from what I see in the manual, you need to setup as a M2616. Can someone help me out on how you do that? When I try to enter that model in the "Mdl" field in ICS, it says that it is "not a valid option for Mdl." We use ICS for our programming via a PC...

I have a T1 and a ISDN Prime circuit currently routed seperately. The ISDN Prime goes to an Adtran Atlas 550 then to the Phone Switch and the T1 goes to a Cisco 2620 Router to the firewall..... I would like to combine the two circuits onto a Cisco Router and I am not familiar with how or if you...

I believe SP1 seemed to have fixed our problem..... I will check with one of our guys to make sure and post it ASAP for you if that is not it.... Thanks!

Okay, the scavenging is set to 1 hour and just to add more info to this thread, the Exchange Server is 2003 on a Win 2003 Server box and the DC with DNS installed is a Win2K box. The DNS server Zones are set to an Active Directory Integrated zones. I figured if the Scavenging was to process...

Ha Ha! Wow, sounds like they had a serious problem with cleaning people! Who would have guessed.... Our servers are in a secured area, so that couldn't be it. I wish it was that simple.... Thanks though....

Okay I will givce that a shot and see what I can find.... Thanks! I will give credit if it works...... I will post my results....

Hello All, I am in search for a reason and/or fix as to why my Exchange 20003 server DNS entry on my DC disappears every Friday morning? We have to go back in and manually enter it back in and we cannot seem to find out the exact root of the problem. Any help is greatly appreciated..... Thanks...

I am not sure if you have heard of the MaxAttach 3000 (NAS Server) but it runs on FreeBSD and the main file storage area is JFS (Journaled File System) creatd by IBM. So anyway, I have tried to mount the partition I need and keep getting "bad superblock" and cannot seem to find a way to get it...

I need some help with trying to recover data off of a Hard Drive that has a JFS Partition on it. It came out of a Maxtor MaxAttach 3000 unit that uses FreeBSD and JFS for the data storage area. I have tried the drive in a Linux box after installing the JFS package from SoureForge, but keep...

I have RPC/HTTP(S) configured on an Exchange 2003 Server (Windows 2003 Server SP1) in a W2K Domain environment. I am having a heck of a time getting this to work. The only way I have been able to get it to work is by opening Ports 135 and 1102 on the firewall. The exchange server is the only...