Search results for query: *

Or just contact a sales representative for your area.

If you expect a licensing issue, just have a look at HISTA messages and Assistant main page. Afaik there are no extra licences needed for a STMIX board, at least not in V10. With V11 even the SLES-upgrade-protection lic's are not needed anymore.

If there is something wrong in the linux os, I would not spend long time in tryin to repair it. Official way is to reset the board - which means a new os installation. This procedure is described in "OpenScape 4000 V11 Volume 4 IP Solutions Service Documentation Issue 13.pdf" in chapter "2.11...

It seems, linux on stmix is somehow not ready. If you can login via ssh, u should be able to see status/repair it.

On stmix there is simply a linux os running, just like on host, assistant, soco, etc. V11 runs OpenSuSe.

Can u access stmix with ssh?

Ahhhh... V11! Afaik, there is a parameter that opens direct access to stmix. For security reasons this is blocked in default setup. This explains lock symbol too, that I didn't see until now.

For some reason the STMIX is not reachable in the LAN. Neither OS nor LW can be determined. Also the lock symbol next to the pen is strange. When you login to assistant via ssh, can you ping the board (192.168.206.200)? Pls. post RMX config (DIS-BCSU,DIS-CGWB,TDCSU,etc.). Maybe the config is...

There are lots of manuals available for OS4k systems. One of them (its for V7 but V11 is not too different) is here for example. Another one covers all AMO's - but be warned, there are hundreds of AMO's and even more parameters (>100.000 I guess). I strongly recommend to start with a OS4k basic...

Off course the stmix' LAN port has to be connected to the network. If there is no router, you have to assign a IP in the subnet of the assistant to reach it with GW-manager. Also upgrade the OS on the stmix with GW-Manager.

It's impossible to say unless you post the diagnostic data from the board. It can be downloaded from the boards websrv from diagnostics.

How did you succeed in configuring the transfer button to the key module? If I try that on our V10R1 system, I get the following: CHA-TAPRO:1234,,OPTIA1,,,,,,,,TRNS,; H500: AMO TAPRO STARTED H18: ****************** PLEASE NOTE: *********************************** FIXED FUNCTIONS...

Did you check if the Linux OS on the STMIX is up to date? If SLES underneath the application is not at least at a certain level, LW manager will not update the LW.

Without a pcap or gateway trace it's almost impossible to help.

It works very well with UFIP devices. but there was a bug that was fixed with V10R1 RMX HF14 (new AMO SBCSU): AB-SBCSU:9041,OPTIDAT; H500: AMO SBCSU GESTARTET +------ SPEZIFISCHE GERAETEDATEN --------- UFIP --------9041---------------+ |...

This command should display all IP-Phones with their corresponding IP's: DIS-SBCSU:,OPTIDAT;

Had a similar issue just recently: Check windows "Start > Settings > Privacy > Microphone". SoftOLA needs to be within the permitted apps (at the bottom).

There were some bugs with TLNOOS and ip phones in V8R2. Did you upgrade to latest RMX HF 63?

Have a look at the CSTA manual. OS4k CSTA and Phone Services If you are a programmer you might be able to create a simple application that can do that for you. There is also a csta programmers manual freely available. If you use SIP trunks only, asterisk as a system in the middle might be the...

You need comwin and a serial/ip connection to the systems ADP/ADS to issue any commands. For changing date/time you need to use CHA-DATE...