Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dherve

    s8300 b or c

    Do the command swversion under the bash or check this command under the WEB pages.
  2. dherve

    IPSI Firmware Version 40

    Confirme that no main issue with IPSI fw40 yet
  3. dherve

    Checking Multiple IPSI Port Settings

    Yes there is a command. What is your CM release ?
  4. dherve

    TN799C unable to set to 100mb full

    As it was said, you can't do it with the TN799C. It's only with the TN799DP that you can change the spped/duplex of the board.
  5. dherve

    Solarwinds or equiv...

    I suggest you CNA application an Avaya Product.
  6. dherve

    Screensaver on the new 96xx models

    Let me have a look in the code this afternoon and I let you know if the logo in include in the firmware or not
  7. dherve

    Definity S8500

    Is there anything block in your firewall between your two locations ? Can you ping the clan from each site to site ?
  8. dherve

    Screensaver on the new 96xx models

    Wrong ... it can be set up. It's like for the 46xx, in the 46xxsettings.txt file, you can manage it with argument baklightoff.
  9. dherve

    New 9630 Telephones

    I've got one for 4 months now and it's a very nice IP Phones
  10. dherve

    MEDPRO question

    5005 is use for your RTCP port. In the ip-network-region, you have a field for that on the first page on the right.
  11. dherve

    LSP Issue on CM 3.1.1

    Any update for this issue ?
  12. dherve

    4621 IP backlight Display

    Anybody have an update regarding this issue. I got the problem on a 4625 ip phone running in 2.5. Thanks to let me know
  13. dherve

    Speed/Duplex NIC Card

    Hello, Is there a command to have the speed/duplex of a NIC card under a Linux? Many thanks in advance.
  14. dherve

    Power down the G650 can't get the dialing tone

    Where are your CLAN/MedPro? If all of them are in the carrier 1A, the answer is YES in anycase....
  15. dherve

    G650 with two IPSI

    It's logical that you need two carriers G650. What is the interest of the IPSI B if you a power cut of the carrier where you have IPSI A and IPSI B????
  16. dherve

    TN2312 IPSI can't get DHCP IP address

    Are you sure about te configuration you have in your ipsi card, I mean the ip address and is DHCP activate for it?
  17. dherve

    G700 Ethernet ports

    The recommandation is 100Meg/Full duplex. Go in Telnet under the P330 side of the G700 and change the speed/duplex as for a Cajun.
  18. dherve

    Change of IP address on S8700

    Any issue if you do that during the ou-of-hours!!! And if you made any mistakes in the mask, subnet mask ip address etc ...
  19. dherve

    Firmware instructions

    Be aware that if you want to upgrade a val-bd, the process is a little bit different because when you are logged in the ftp of your val-bd you have to write "cd /" before put the file in the board. Good luck
  20. dherve

    IP PHONE AND DHCP

    Hi, I've got a question regarding IP Phone and the DHCP. I've got a DHCP in my solution with two clans in the same network region. I note the ip address of the clan on my dhcp. When my ip phone lost the connection with my first clan, the phone goes to discovering and it doesn't registered to...

Part and Inventory Search

Back
Top