Search results for query: *

I was afraid that I did not give enough detail..... c:\nslookup default server: nifty.abc.com Address: 1.2.3.4 > */At this point everything looks normal*/ */If I type in the following */ >ls -d abc.com */I receive either...Incidentally I typed in the wrong information in the initial post*/...

Which one is screwed up? I am building a new domain (abc.com) with W2K as the operating system, and I eventually wish to have the new domain run AD. Last night I was creating both the forward and reverse DNS zones for abc.com Standard Primary both forward and backward Allow dynamic...

First things first. Make sure that you are running version 7 of the Firebox software. It seems to me at least to be much easier to navigate.

Can anyone steer me toward a document from the Watchguard site that has an explanation of each of the columns in the traffic monitor? Thanks, Yomang

I wish to have a VPN tunnel between my domain (FB 1000 appliance -FB) and another domain (Sidewinder appliance-SW) to have some of our remote workers that reside in the SW domain access their email from our domain and eventually to be able to add data to a database that is now being created...

Here is a new link to something that I have not had time to try as of yet. Let me know if it works for you or not. http://www.watchguard.com/support/advancedfaqs/muvpn-sn_manualuninstall.asp yomang

I have yet to find an answer to this problem. I have even been in touch with some WG staff and have yet to find an answer. GRRRRRRR

Thanks for the answer JL. However it seems as if I have some "special case" once again. All of the settings contained within the instructions are no longer residing on this particular laptop. It looks like another call to Asia..... Yomang

BTW, I get the error message if I try to install or uninstall the "lite" version of the MUVPN. Also, if I try to install the full version with zone alarm I am prompted to assure that zone alarm is shut down first. It is not installed and the safenet connection no longer exists...

Trying to install the wgx file onto a laptop that will be used for VPN (using MUVPN). I download and install the client software, MUVPNlite612. At the prompt to navigate to the wgx file, which was on a floppy, I navigate to the floppy but do not have the floppy inserted. Naturally, I figure...

Is it a steady flash, or is it a network traffic kind of blink?

Firebox 1000 Routed mode Have saved the *.cfg file to the FB, and have saved a backup to a network drive. Have set up both numbers to reply to pings. Can ping the inside but not the outside number and cannot get through to the outside world from the inside of the firebox. Had a friend run a...

I first though that, but I took that hide attribute off of the system32 directory and the OCX did not show up until I manually copy/pasted. What also leads me away from this is that crystal will not run unless I do the manual copy/paste. After doing it manually the reports run fine...

WE are running CR 8.5 on an NT4 servers with 2k workstations. I am having trouble with a single file; COMDLG32.OCX. I have created images with this file included in C:\Winnt\system32 directory. The reports will not run on the newly imaged machines yielding me an error message telling me that...

I have been having this problem for a couple of weeks now. NAV detects the Yaha virus several times a day and quarantines the virus while restricting access. I have no idea how or why this is being generated. I am starting to think that this is a very serious situation. I offer the following...

I am currently adding domain names to the "message filtering" button under the "Accept Connections" portion of the "Connection" tab under the "Internet Mail Service" connection. Example spammer addresses: spamboy@123-4.domain.com...

We have a single domain with some NT4 servers and we wish to grant remote access to a limited number of people. We have several modems that need to be pooled together. We have found several products to do this, but what we have not seen is an actual plan to assist in the deployment. Thank you...

Thank you for the reply I should have stated befoe that I have tried exactly what you suggested and I saw nothing was recorded in the event logs.

Exchange 5.5 box. I am having trouble accessing a single exchange server. When I press CTRL-ALT-DEL the machine does not respond, or it responds allowing me to type in the password to logon and the logon never completes. The machine just hangs in a state between entering the password, and...

Is there a way to set up the return receipt function to automatically work with only certain, selected email address? These addresses would be contained on the exchange server of the network. Yomang