Search results for query: *

I noticed this when I query my domain xxx.xxx : Searching for xxx.xxx A record at c.root-servers.net [192.33.4.12]: Got referral to L.GTLD-SERVERS.net. (zone: net.) [took 6 ms] Searching for xxx.xxx A record at L.GTLD-SERVERS.net. [192.41.162.30]: Reports xxx.xxx. [took 21 ms] Why...

There is a command : match protocol http url in Cisco, what is this for?

What I want is filtering a small number of URLs (about 10 URLs) & I want to do it with the switch.

I have a Cisco 6500 switch (IOS 12.1), I need to know how can I use it for URL filtering with IOS commands

I have a PIX 515E, with 3 interfaces, 2 of them are used, I want to use the third interface with different IP & subnet from the other two interfaces, how can I route the traffic to reach this 3rd interface.

I doing a nat behind a Cisco 7200 & I noticed that when I'm doing : sh ip nat trans that ther is a strange public IPs in the Inside Local entries. What this means?

...In prevoius cases, I see lines such orphaned messages, but in this, you can notice only that the lines contains 20050913 000012 127.0.0.1 *SMTP* (fa6a87ce0102901d) processing C:\IMail\spool\Qfa6a87ce0102901d.SMD were no longer exist! The point (that catch the eye) is that in the Task...

Can I put IP addresses from the same subnet on the inside & ouside interfaces eg. x.x.x.y/24 & x.x.x.z/24

I want to know what this means : aaa authentication ppp default group tacacs+

Thks, but with the above commands can the outside users have access to the servers?

I have 2 different group of servers with different subnets & I want to put them in 2 different interfaces behind my PIX515 & let them connected without NAT, can I do this & how?

I need to know what is the best SW for measuring the bandwidth of our DSL link?

Can you point me to a doc on doing this?

I have a several Cisco routers which they are configured by some of my employees, I need a way to know each command when it is added to the configuration of these routers to be recorded by whom add it & also at which time & the syntax of the command?

I have several servers which I need to put behind PIX 515E on the same interface but this servers have IPs from 2 different subnets, is it possible to put all of them on the same interface without changing their IPs?

We have a cache name server for our clients using bind 9.2.1-1.7x.2, & also we have a primary & secondary name servers for the domains registered by our clients. How can I let our cache server direct the queries recieved for each domain exist in the primary & secondary servers directly to...

Our ISP are using imail 6.5 as a mail server to us, I found that when I'm using Outlook express to download my email using IMAP, the email downloaded & remains for some days & after that it vanished. Any one encounter this problem?

That's what we have now : We have a Windows 2k which runs MsSQL server where the users database reside. Also we have a Windows 2K which runs a Radius server. The Radius server has 2 network cards, one with public IP address which connect the srever to the Internet & the other interface with...

We have a database of dialup users, we need to know what is the best method to secure this database from hackers & intruders ?

I want to know how can I see the output of : debug ppp negotiation command which I want to do on Cisco 3600 access server ?