Search results for query: *

I'm not quite sure yet what I'll do about it but I will try to update what worked for me. Your help was appreciated.

Call pilot software version is CP 30.00.75.22. I did write out but forgot to post reply.

In your personal experience does it have any issues connecting to the Nortel system like I am experiencing with the smart hub's. I have never dealt with VoIP so a couple question's Would Sasktel still be my service provider? Does each VoIP line has a monthly fee or is it covered with my...

First of, I called the carrier, they are still looking into it for me. Second, I did check the seetting's on the device but none of them deal with DTMF so there is nothing I can do there. Third, I did play around with changing the loss package setting but it didn't seem to help. Software...

Here are the number's of the card's NNTM0409ZLV1 NT5B41GA-93 REL 02B MFG 970626 NNTM0408TMRE NT5B41GA-93 REL02 MFG 961010 Here are the setting's under Lines/Trunk line data Trunk type: Loop Line type: Pool A Dial mode: Tone Prime set: 160 Distinct ring: Y Auto privacy: Y...

The smart hub is to provide internet and phone service of a cellular signal but I'm only using it for phone service to provide more lines into my phone system. Internet on site is provided by starlink. Yes, located in semi remote area in Sask. Where would I find the NT number's and which CO...

Thank's for the reply I already use something that work of a cell signal, convert's it to analog than I come of this device with a patch cord and punch onto my system incoming line port's. It's called a smarthub. ZTE MF279T. But I'm having issues when someone phones in on these line's and...

I did google ata and I see now what it is. Does this work with a norstar system? Has anyone used it before?

Have you ever tried this before? Is ata a misprint or does that stand for something? Thank's

Located in Canada, best country there is. Is it possible to do this without physical wires? Internet or cell signal or some other means?

Thank you

Hello everyone I have a norstar modular ics system with a call pilot 100 Is there a tried and true method for getting more lines into these things without bringing more physical lines onto my site. I believe they do not support VOiP so I'm wondering if there is a different approach. I...

Hello everyone I have a norstar modular ics system with a call pilot 100 Is there a way tried and true method for getting more lines into these things without bringing more physical lines onto my site. I believe they do not support VOiP so I'm wondering if there is a different approach. I...

Are you saying I would have to upload something onto the Smart hub to fix this issue. My friends panasonic system, with all settings in the smarthub exactly the same, works wonderfully. Is it because his system gets better DTMF or doesn't need as good a DTMF to work? Thank you.

First of thanks for the reply As far as changing settings is concerned, I can log onto the hubs dashboard and change things but I am not sure what to change. Where would I start? I have talked with ZTE but I wasn't sure which questions to ask so it wasn,t very productive. Is it possible that...

Trunk mode is set to super. Is that what you mean with supervision turned on? I have 8 lines coming into this system now. 3 are wired 5 are with smart hubs I have connected the hubs to ports where the lines were connected and the problems seem to be following the the hubs. Also, all lines dial...

Hello everyone I'm a business owner who is using a Norstar Modular ICS ( not sure on the correct model #, if it's needed to help me, please let me know where to find it) and a call pilot 100. For the last few years I have done my own programming on it but I'm no expert. Up till now we only...