Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
call pilot aa
- Thread starter ballewj
- Start date
- Thread starter
- #4
hello
when dialing the main number, the auto attn answers and message plays
if you know your parties ext. you can dial it at any time
please press 1 for directory
once in directory 4 options come up 1 for sales , 2 for security , 3 for maintance ,
this is were i need to make the change the ext number for option 3 has changed
can i make this change through the phone interface for vm ie: feature 983
or will i need software like ICSRT or a call manager added to get into call pilot ,via serial port
when dialing the main number, the auto attn answers and message plays
if you know your parties ext. you can dial it at any time
please press 1 for directory
once in directory 4 options come up 1 for sales , 2 for security , 3 for maintance ,
this is were i need to make the change the ext number for option 3 has changed
can i make this change through the phone interface for vm ie: feature 983
or will i need software like ICSRT or a call manager added to get into call pilot ,via serial port
- Thread starter
- #5
hello
when dialing the main number, the auto attn answers and message plays
if you know your parties ext. you can dial it at any time
please press 1 for directory
once in directory 4 options come up 1 for sales , 2 for security , 3 for maintance ,
this is were i need to make the change the ext number for option 3 has changed
can i make this change through the phone interface for vm ie: feature 983
or will i need software like ICSRT or a call manager added to get into call pilot ,via serial port
STLphone tech
Vendor
- Mar 7, 2025
- 11
I believe this can be done through the phone, feature 983, can't hurt to try.
Changing the CCR tree on a Call Pilot can be done without disable/re-enable, that was required for the Flash and NAM voicemails.
Make sure you have a call pilot, F983, log in, then 9 for system version.
F983
log in
OTHR - CCR - ADMIN
Enter the tree number, likely 1
CHNG
It should tell you the tree is enabled, that's fine as per my note above.
at the "Path:" prompt enter 13
CHNG
INTERNAL
New extension number
Remember to END - SAVE - YES at the end to save your changes.
Make sure you have a call pilot, F983, log in, then 9 for system version.
F983
log in
OTHR - CCR - ADMIN
Enter the tree number, likely 1
CHNG
It should tell you the tree is enabled, that's fine as per my note above.
at the "Path:" prompt enter 13
CHNG
INTERNAL
New extension number
Remember to END - SAVE - YES at the end to save your changes.
- Thread starter
- #9
- Thread starter
- #10
Similar threads
- Locked
- Question
