Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by yogich

  1. yogich

    LANU is reseting MPBE

    LAN address for the ipLDK is 10.0.0.3 for ISDN connection, right? That means I have to be in the same network... Oh, boy... I'm not... Can I change this ISDN IP what I need? And they try connect via PC ADMIN using Connect (ISDN)?
  2. yogich

    LANU is reseting MPBE

    can i get more information how to connect using ISDN... what is required from h/w; which settings should be done etc. Thanks a lot!
  3. yogich

    LANU is reseting MPBE

    Yes... it is... Now I'm 300km from that point... Next time I will go there I will take LANU and try to install it one more time... May be at that time the stars were not on the right location... :) Btw is there any other way to get connected to the PBX remotely? I need LANU only to be connected...
  4. yogich

    LANU is reseting MPBE

    Regarding the grounding system I can tell it is not set... But I can be sure that I didn't remove or install with power on. Firstly I have disconnected all from the power and only after that I installed new boards and powered on back. And also if I install old MPBE with LANU - everything is...
  5. yogich

    LANU is reseting MPBE

    That's the point... With old MPBE the LANU is working... it is ok... only with new MPBN... Because previously it was already installed on old MPBE... I just wanted to install it on a new one and got this result... sorrowfully... this pbx is allocated 300km from me and it is the best way for...
  6. yogich

    LANU is reseting MPBE

    Then yes... I inputted IP and other settings in PGM108... the result as I described... Resetting... The same happening even when there are no any other cards... only MPBE + LANU! p.s. the file shows how system phone looks like... http://www.mediafire.com/?w30j0xho9j2ucjk
  7. yogich

    LANU is reseting MPBE

    Are you sure about PGM175? It is some kind of "Print Serial Port Selection(PGM175)
  8. yogich

    LANU is reseting MPBE

    I did it... I have removed LANU, entered IP address and other net settings and switched on PBX. The effect was the same. PBX was resetting continuously...
  9. yogich

    LANU is reseting MPBE

    the foto of new board with old lanu... pllu also shown here but it is not installed.. is it needed?http://www.mediafire.com/?fnm29vyb7aak5lz
  10. yogich

    LANU is reseting MPBE

    Hello. I'm new here... Can't find the answer surfing the Web... Here is the history. I have decided to upgrade my 5-6 years old ipLDK-100. I got new MPBE (rev.1.6 N1104) and new PMUE (IPLDK-100 ASMU2N GS90p-3. 9E). The old one was the followig - MPBE (rev.1.9 C0503) + PMUE (LDK-100 PMU2E...
See more

Part and Inventory Search

Back
Top