Recent content by wip

In need of a Hipath 3500 Telephone System tecnician to help switch out PRI?

Disable outbound transfer in all class of services This is accomplished by setting up the IP address in call pilot to disable

In the line access section of terminals and sets you will need to go to line pools and PRI-A needs a Yes, Then when you build your route and use PRI-A, you can assign Prime line as PRI-A, use whatever outdial code you need to make a call......Need to make sure that you are not using a 9 in Line...

When recording a live conversation into the CP 100 VM box, we can record a 5, 10, 15 minute conversation and it all gets passed through to the Outlook 2003 on my machine, yet when lets say a 23 minute recording or 25 minute recording gets recorded, it transfers the it to outlook as an email yet...

BCM 400 4.0 Element Mgr not sure took element manager off this machine work in progress

Go to login to a BCM 400..... BCM says a required (BCM200.4.9-0) needs to be installed to proceed. Press ok to continue. Pressed OK - now get error unable to login. What? Nortel Networks --------Explain if one can...

have not tried Line Tuning digit.....Need to go find out where this is....probably right in front of the eyes... --Thank you all who read our fun issues w NN

It does not matter if it is IP phones or T7316E telephones? It happens to both sets, just tried it on both digital and IP sets, get the same thing...no beep.... WIP

Internal calls to vm get a beep through Feature 980 + Ext., It is only on the external call that you do not hear a beep? Yes, have tried creating a new mailbox.....these lines being used are loop lines come off of a 66 block into a GATM8 module..... --Joey D Wip

Has anyone experienced a no beep problem after someone records a message and then there is no beep to let the outside caller know its time to speak? We have rebooted this system and works for awhile and then the beep goes away. ? :>)~ Callpilot will tell the caller to speak up and that is...

Can someone tell me if we have a callpilot 100 vm set up with call recording, is there a way to record a call like Feature 989 into a voicemail and then send this wave file to someone through the internet so they can write it out for me on paper? Is this a feature that we can acquire through a...

Cna someone tell me if we have a callpilot 100 vm set up with call recording, is there a way to record a call like Feature 989 into a voicemail and then send this wave file to someone through the internet so they can write it out for me on paper? Is this a feature that we can acquire through a...

Customer gets more with NAM 4.1 over Nam 4.04C, What is the customer needing to do..... What seems to not be working in the nam? Work in Progress

Unless you can get the Telco to do the clocking for you on their end and then you can turn clocking services off on your end....AT&T, Verizon have the ability to do this as well a lot of the time on PRI's

The H231 is a hunt group that you have set up that the AA transfers to with a group of sets.....Caller ID mapping will need to be set up to ring on the Hunt group extension too...