Recent content by williambishop

It's way overkill for that small an environment. Terminal services would be more than adequate for that task.

run msconfig and see if there is an entry for it in the startup tab.

MSN instant messenger.

You may have trouble with the newer kazaa's and the like, most have gone to a random port and a user with minimum intelligence can move the directories and use links. If it is a large organization, you will end up using a packet shaper...but for smaller companies, I go with the guys, find and...

Get a pix with multiple slots, and don't buy the nics from cisco, they are generic intel 10/100's. Turn off, insert cards, power on, configure and away you go.

And you can find the caps lock key to the left of the A key on your keyboard. Thanks.

I'm with annihil on this one, you are more than likely forbidden to access it as root. Telnet in(better yet ssh if you have it installed) as a regular user, and su to root. This will allow you to install. To place the files, it would be easier to put the files to the server, again, you won't...

Got a 604e 166 mhz processor to upgrade the 100mhz built on one that is on my 7248 rs/6000. Unfortunately I cannot find a service manual, so I don't know the procedure other than sticking it in the zif socket and sticking on a heatsink/fan. There are jumpers, but without a guide I don't know...

It would have been smart to run the equivelant of sysprep on the XP boxes. That aside, there is a download out there that some unscrupulous people use to change the license number after they have downloaded a hacked copy to a legit number.

I have recovered everything from little 2.1 scsi drives to 140 gig scsi and large IDE drives using the freezing method. It has worked in at least 10 cases where I had even changed out the circuit board. It does not work every time, and I have had a few instances where it didn't. But IT DOES...

Boot from media, go for a shell, edit and restart.

The webmin page has all the instructions you need to install webmin. Following the directions, and downloading a couple of necessary files it took less than 20 minutes to get it going and connect remotely. I did this after someone suggested webmin as a possiblity for remote command. I know...

Just go download the source file and compile it on your machine...

How do you go about doing that? I know that once upon a time it was a one week course in texas at an HP seminar. I want an in-house technician to be able to service the 100 odd printers that we have. I know I can't be a var and get the parts at a reduced price, but I'm sure it would cut back on...

No D-link also has a dmz zone. The virtual server is set up so that you can select various ports to go to specific ip's on your internal network. For instance, I have ftp going specifically to address 140 on my internal net. I have ssh going to 100, etc....