Recent content by VOiDDude

Does anyone know what's the latest firmware that can be used on the 401 ?

Sorry, I thin I made a typo. If use use 2.1(35) with the correct manager there is a tickbox to enable to connect two outgoing calls together. Jesterock, On index this has always worked as far as I know.

You're right I can only find the setting under manager 3.1(35) not under 3.0(44).

I think they introduced a new tickbox to enable this feature on the system form. Is it on ?

Yes, do a google search on "xyntservice".

Is it really automatically going down or after a merge ? Maybe you could try to change a 4602 with a 4610 to see if it has the same problem. You could also put an SOE in with a couple of analog phones. How many phones are we talking about ?

I suppose you're using DT's ? Just press the 'Program' to enable the DTMF sending.

If you are using conferencing center v3 in combination with 3.0(40) you will find the MOH for the conferences is broken.

I wouldn't use it myself because but there exists since 2.1 something like a "hidden parameter" to enable expermimental faxing between the IPO and CM. I can't remeber what it was but give a call to Avaya.

Use the monitor and log to a file. The monitor output will tell you when there are no more free ports left.

Forward this question to Avaya. The more people ask for it the quicker they will implement it (I hope :)).

As far as I know no. We had the same problem wit the INDeX and Avaya always stated that specifying the numbering plan is an optional ISDN requirement and is not required.

Yes, There is an 4-port analog module available you can fit in expansion slot A or B or if the 2 slots are occupied you can connect and 16-port expansion module.

Yes, the shortcode is all you need to route the call to the VM Pro. You're right about the conf code, it's the same for everyone. Only the user PIN is different. As far as I know the module only checks against the conf code.

Thanks ! It works !