Recent content by vlan52

Hi, Thanks for your questions! Just a few things... When you say "disable" the B-C interface do you mean unmanaged under NNM or just to disable the interface on the router/switch as an admin would do? If you unmanage it from NNM, it won't show any alarms, because it is supposed to be a useless...

Excellent, Now, you should have all the interfaces set us unmanaged except for the management interface/IP address. The node should have that IP as the only reference for its name under NNM. When you discover the node it should discover it using that IP. NNM already has an "internal trap" as...

Hi wenger, Just a quick question, do you really need to know when any interface/port in the switch goes down? Or can you have one single interface with an IP address for management and when this one fails you can have a Node Down alarm? If the switch fails, or anything in the switch fails, it...

plshlpme" I know it is a default route and it is all "ndinc" needed to correct the previous situation. Now everything is reacheable and he can make proper corrections. Once "ndinc" confirms he needs static routes or any routing protocol set up in order to provide routes back to the other side...

I'm glad it is working now! Have a great day ndinc. vlan52 The end of wisdom is freedom. The end of culture is perfection. The end of education is character. The end of knowledge is love.

In order to ping the Ethernet block in the remote office, that particular router will need at least one default router. I'd suggest: ip route 0.0.0.0 0.0.0.0 Serial0/0 You don't need a default route or any other route to/from the Ethernet interface at the remote router since it is direclty...

Hi Graphco, do you still have this issue? Which router is the "closest" to your NNM server? Rome or Napoli? Which router is sending the protocol DOWN trap when the ATM PVC comes up? Rome or Napoli? Thanks in advance. vlan52 The end of wisdom is freedom. The end of culture is perfection. The...

Hi ndinc, Please excuse my humble question here, but why do you have two default routes pointing to different interfaces? [thumbsdown] ip route 0.0.0.0 0.0.0.0 Ethernet0/0 ip route 0.0.0.0 0.0.0.0 Serial0/0 Also, could you please add the IP blocks instead of using x.x.x.? It would make it much...

Hi, I'm back in this wonderful site after almost 3 years...! Nigel Bowden, I'm so happy to see you around! Koing, Just saw your question Koing, any mail relay server will do, you just need to use the phone# then the domain for that number and it will reach the desired cell phone. Most of SMS...

Yes, the opcinfo file is on the managed node, under /opt/OV/bin/OpC/install/opcinfo (Unix)and look under /usr/opt/OV/bin/install (Windows). OPC_RESOLVE_IP x.y.x.a helps a lot, you could, if you have multiple interfaces on one managed node, set the interface's IP address you are interested in...

Hi vallan, well, that's why you should not trust smtp/e-mail for notifications, since sometimes it may take a while for a message to arrive, check SMTP's RFC for details HP-OVO will not delete nodes instantly (is not supposed to do that), just after a period of time, of being "down&quot...

Just after the install, on the managed node, make sure you have "name resolution" from your management server (resolving the name of the managed node). Have you set up or discover the pc you are trying to monitor under OVO / NNM? Is the pc/object assigned to your Node Bank/Node Group...

Hi JPJoanany, are you sure from your pc, can resolve the name of the management server? Is there a firewall in the middle? When you talk about a trap, have you generated an snmp trap?Because your OVO server will expect a trap with an OID that is properly configured under NNM, or a properly...

Hi there Learningman, right below, there is a link to download Cisco MIBs, that may be useful, anyway, NNM "knows" you don't currently have "ciscoModules" loaded (required to support 3640's mib). That's why it doesn't let you upload the mibs particularly for Cisco 3640. At...

Hi zaianeimed, are the pc's in different segments? Have you tried to poll through snmp your default gateway? And for you 2nd question, if you start snmp on the managed nodes or pc's, and make sure at least the RO community matches the one in your management server, you should be able to manage...