Recent content by tin

Hi Check out this website: http://www.novell.com/coolsolutions/tools/1088.html Regards Tin

I think you have to check, where the termination point is. In the system partition you can terminate the SCSI-Port, you can terminate the external device or the cable. When the SCSI port is terminated, your device ca not work. Terminate the device !

Every product that you have installed, is listed in nwconfig. That a program will be displayed in this list it needs the product.ini. Have you tried to install the program in nwconfig / product options / install a product not listed ?

From a command prompt, browse to the RESDIR directory and type the following command: FLAG *.* N /S This will correct any rights corruption present in the RESDIR directory. If this doesn't work for all of the printers associated, browse for the file name that was mentioned in the error...

Have you installed the Compaq Insight Agents on these servers ? When yes, what Version ? In the Insight Manager Console, do you have the servers manually imported, via IP-Device List or only discovered ? Try it manually !

Hi Mount the Compaq Management CD as a NetWare Volume and start cpqagin.nlm from the specific directory. Read the readme.txt !!

Hi Check out this site: http://www.compaq.com/support/techpubs/customer_advisories/ DO990915_CW01_0.html I hope it will be helpful

Hi I think the problem is a slow network connection. If it isn`t delete or change the attributes in NWADMIN. I think then it runs better. I hope this will help

Hi Keith, You also can create a volume on the Serverconsole. On the system console type nwconfig, select Standard Disk Options, select NetWare Volume Options, on the next screen press insert, select the "freespace", and so on. The next steps are very easy and "self...

When you have Compaq Insight Manager installed you can reboot this server from there.

When you switch the power on check if there lights a red led on the systemboard. When it is check that the PPM (Processor Power module), the Processor, the Powercables and the memories are really in place. When all of them are surely connected, remove them all and and place them a new time in...

Hi. I think the User who starts the restore, don`t have enough rights to the users directory. Check out this link: http://support.cai.com/helpfiles/asnthelp/ASMGRError_3404.html

Hi Melise What version of Arcserve and on which Platform have you installed ?

hi you are not alone. we have the same problem. i dont know how many hours i have taken to solve this problem. and now what`s to do when this message appears: RESTART THE SERVER. we have 500 Standalone Netware Servers with Arcserve installed. Everytime this message appeare we restart the...

Bevor you start the restore from this, tape you have to make a merge operation on this tape, and then you will see the directory-structure and files.