Recent content by TheBoy83

Sounds like an extension side logger and the logger is not correctly connected to the extension..would check the jumpering / connection.

The new 4621 adheres to Ciscos PoE spec I think its 7.1 or similar, works fine on 3750's

Hi, Does anyone have the UK tone settings for call clasification when using soft diallers? The parameters for ringback, busy, intercept etc thanks

I am having problems with CLAN's, even though both sides are set 100Mb Full, they dont connect. If you set the switch to auto, then back to 100Mb Full it connects. Is this the problem you get?

Hi, How many simultaneous calls can a PN consisting of 2 G650s handle? Assuming the calls are DS1 in, Medpro out and using E1's? Thanks in advance

Is this part of a Cisco ICM install? You need to know which version of ICM PIM you are using. Maybe 5.05. Best to check with the supplier

Do you have admin rights to the PC?

We had this last year. The Linux time on your S8700's daylight savings rules are clashing with those setup through DSA. I beleive our maintainer set the daylight savings on the Linux, and we have then disabled them on the Avaya programming.

Hi, We need to be able to have faxes / modems setup on a remote site, where all phones are ip. We have no equipment on site other than the ip handsets that connect back to the switch in a different location. Are there any devices that can interface with analogue devices and convert to Avaya IP?

Maybe try to increase the specification of the PC running the software. We have the same problem, I think its the software just not up to scratch.

Is there any way with Communication Manager 2.0 to have the phones feature buttons download from a file on the TFTP server, instead of going round each phone and having to label the buttons correctly yourselve? Also how can I restrict users from messing around with these features? The phones...

Hi, I'm stuck now!! I'm trying to setup an interactive script on our conversant that queries tables on a remote database, but am having great difficulties. I have been following the manual but to no avail. Basically we have edited the tnsnames.ora on the conversant, with the correct info for...

Thanks for your help, just set the Q = Y on the announcments about an hour ago, have had much better success. Have checked using display events and have had no retries since changing the setting. I would have thought that the boards would still run busy and only start queuing once all 16 ports...

Hi all, Does anybody have any ideas that would help with a problem I am currently faced with. We have situations where high numbers of calls will queue in a particular vector, upwards of 100. Everything works fine except that the announcement board/s being used busy out due to the high demand...