Recent content by tanker135

ALL: The tunnel is established (good phase 1&2) sh cry isa sa and sh cry ips sa both show good. However, I cannot ping end to end. I've checked routing. Nothing helps. I did change network 172.18.129.0 to 192.168.1.0 and all is well. Do you have any suggestions? Here is the config of one PIX...

MoLaker, Been there, done that. I did not change a thing.

ALL: This has me stumped. I cannot open any report in design view in any Access database. I can design forms, queries, etc... This a recent issue and I cannot find any usefull information that speaks to a cause. Any ideas? Tom

Hello! My company is changing ISPs and I need to configure a Cisco 2610 for our new ISP. I'm looking for a basic IOS config that takes security in considuration. Behind the router is a firewall. The WAN transport is serial PPP. Thanks!

I've installed Snort IDS on Win2K. I need to attach this to my internet service but first I need to turn my Win2K ethernet interface into a passive interface. Does anyone know how to do this?

Folks, Presently I have a simple site to site VPN using 501's. It works great. My single access list is "access-list 101 permit ip 172.18.128.0 255.255.255.224 172.18.0.0 255.255.192.0" I need to have users at the 172.18.128.0 network (remote network) go out my firewall here at HQ...

We are running an IP120 at a store. It's primary task is VPN back to HQ. Additionally, we need to restrict internet kiosks in the store to a closed set of destination URL's. For example: ".ibm.com". I created a group containing the domains and placed it in the destination column. With...

If these boxes are in the same ciy, collect them, bring them to your lab and strip from the configs all but the basics for a simple tunnel. Use the simple site to site PIX VPN setup found at Cisco.com. You can simulate a public WAN with a couple of routers configured back to back. Use host PC's...

Folks, I figured it out. It helps to have the host being ping'd to be on the correct network :( Thanks for the help.

Jan, I've made the changes to acl with no change in status. This should be a slam-dunk install but it is fighting me all the way. Here are the configs now with the changes. I slightly changed the key on both. As it sits, I've got two good tunnel lights but still no talky between. nameif...

Folks, Using two 501,s I have two good tunnel lights but cannot ping end to end. Included here are my scripts and screen dumps. Any help you can give would be great. nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname Warehouse fixup protocol ftp 21 fixup...

Is PDM included with a PIX 501 purchase? Thanks!

The network at the home office is 172.18.0.0/18. I'll use 172.18.128.0/26 at the remote. Based on this, can you illustrate a config based on http://www.cisco.com/warp/public/110/38.html? I really want to get this right the first time and any help you can give will be appreciated. Thanks.

Folks, I need to setup a pt-pt VPN using 501's. I have dedicated AT&T internet at home office with 1/2 class c address range. The remote is being installed with Business class ADSL (1 static IP). Can you fill me in on all details re. the configuration needed? Are there any issues I need to...