Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by SYAR2003

  1. SYAR2003

    VMX/Voice 250i , Error type 69 .

    From what i know alarm 3 isn't to be ignored. 1 is lowest priority and 3 is highest . So i will follow up on the type 69 alarm . Thks
  2. SYAR2003

    VMX/Voice 250i , Error type 69 .

    Thanks both . The modem is enabled (and has been operative for 8 years) Just suddenly stopped working one day ,without any user invension. And system has also been restarted . Will try @MODEM DIS followed by a @MODEM ENABLE just in case it magically starts working again . Syar
  3. SYAR2003

    VMX/Voice 250i , Error type 69 .

    Hi folks ! Does anybody with newer Installation & Maintenance doc have the possibility to look up this error code in the hardware error table , and post it. The type error is not listed in mine ... TYPE SLOT CHNL PRIO DATE TIME #BAD DATA1 DATA2 DATA3 DATA4 69 05 00 3...
  4. SYAR2003

    SYAR2003 ?

    I'm not retired . Just been out of business caused by a long sick leave during 2004. I'll check in from time to time from now on [wavey2] . Thx for the nice post Regards
  5. SYAR2003

    windows delayed write failure

    Hi there ! I have struggled with this before . If you have used tuneup utilities 2004 to optimize system you should reset the LargeSystemCache back to default (0). In registry: HKey_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement key :LargeSystemCache Change...
  6. SYAR2003

    Desktop

    I have ATI radeon grapics and in the advanced display settings there is a rotation option to 180 degrees (witch becomes horizontally) . This made the same thing happen for me. Setting it back on landscape 0 rotation fixed it . Check for something simular on the users graphic properties. ...
  7. SYAR2003

    addressed isn't answer

    Example : PELPI:DIR="1001",LIST=1,CHO=1,ANSPOS="1001",TIME=12,BSYCHO=2; bsycho(busy choice) redirects to CHO 2 in the list when anspos in CHO 1 is busy. PELPI:DIR="1001",LIST=1,CHO=2,ANSPOS="1002",TIME=12;
  8. SYAR2003

    GSFTI

    It can be variable disturbances from ground or something . ...
  9. SYAR2003

    jump group

    Perhaps it's programmed as RID . srad ! Is it PELPI programming on these numbers ? ... ...
  10. SYAR2003

    addressed isn't answer

    Forgot ! To remove use PELPE:DIR= ; ( removes all lists for the directory number ) or PELPE:DIR= ,LIST=1,CHO=3; (remove one choice in the list #1) or PELPE:DIR= ,LIST=1; (remove list#1 if multiple lists is used) Syar
  11. SYAR2003

    addressed isn't answer

    Hi srad ! yes in bc10 you can have cho=(1-5) PELPI:DIR="Freeset",LIST=1,CHO=1,ANSPOS="Freeset",TIME=12; PELPI:DIR="Freeset",LIST=1,CHO=2,ANSPOS="Analog",TIME=12; PELPI:DIR="Freeset",LIST=1,CHO=3,ANSPOS="Analog",TIME=12; PELPI:DIR="Freeset",LIST=1,CHO=4,ANSPOS="Analog",TIME=12...
  12. SYAR2003

    Network service in QSIG

    mdman ! From where is this .. ? "QSIG-Path Replacement in BC11 sp13" Networking enhancements: Support for standard QSIG-Call Forwarding, QSIG-Call Transfer and QSIG-Path Replacement, and UUI transport in QSIG GF messages. You have to include it in parnum 223 .
  13. SYAR2003

    Network service in QSIG

    Note that ! Theese are ECMA Q-Sig parameters. Note For BC11/12 only ! For ISO Q-Sig Change the VARI D1 to 7 . VARI D4 to 4 (with General Protocol Updates) VARI D1 set channel numbering as 1-30(7) values(4-7) User-user tunneling through in generic function protocol. VARI D1 = 7 ( Supp...
  14. SYAR2003

    How to disable incoming external call on access2?

    I want to Enable access2 whether internal or External calls received without using ODN2 key! Is it Possible? Yes , almost ! Set the extensions serv D7D8 to minimum 06 . KSCAC:DIR= ,SERV=xxxxxx06 And make the route generate call waiting ROCAC:ROU= ,SERV=3xxxxxxxxx; Internally will never be...
  15. SYAR2003

    One Call Setting

    This is the description of the parameter , i think it describes it well. The parameter states that the entered answering position can only be called once while the call is being distributed. When the parameter is set to NO, the selected answering position can be called as many times as the...
See more

Part and Inventory Search

Back
Top