Recent content by Rod25

Hi, Is it possible to use a cisco router to give out setting files etc to ip phones from Http server on cisco router? option 242 ascii "MCIPADD=10.x.x.1,10.x.x.2,10.x.x.3,MCPORT=1719,TFTPSRVR=10.x.x.254" lease infinite I can upload 9600 files to router but I missing something? Regards, R

Hi, When an Attendant is busy can calls overflow to another Attendant in different Tenant partition ? Thanks in advance, r

Hi All, Has anyone added a handset to an Attendants IP SoftConsole PC. Does it wotk OK? Thanks in Advance, Rod

Hi All, I have a device that connects to our DS1 board. But it can only see 4 digits sent from the telco i.e. 5555 but I need to see 1234-5555. How can I programme this on the Avaya CM3.1 Thanks in advance, Rodney

How do I determine whether S8300 is A or B, there is no sticker on the server? Thanks, Rod

Hi, I am having the same issue. I am not sure how to netconfig eth1? R

Hi Nemotao, Thanks for your reply. I can now putty to 192.11.13.6 but I not sure how to 'netConfig' eth1? Do you know the correct command line. Thanks in advance, R

Hi all, Has anyone had any problems trying to connect to the services port on the SAMP module? I have installed the AES software and restarted server. I can still connect to the temporary services port Eth1 192.11.13.6 but this interface is needed to communicate with CLAN. I am following the...

Hi all, What does the following represent under 'display system-parameters customer-options' Product ID Rel. Limit Used IP_API_A : 100 0 IP_API_B : 0 0 IP_API_C : 0 0 Thanks in advance. R

Hi Steve, Thanks for your reply.. I can administer the S8700 from the LAN by using SAT or explorer but when I dial into the ASG I can only connect to the 8700 via telnet and but not explorer. The reason I need this is because my linux knowledge is limited and I need to be able to download...

Hi Guys, Has anyone dialled into an ASG and browsed an S8720 via explorer? I can only ssh or telnet to it. Not sure if this is supported. Regards, R

Hi All, I am trying to add an LX onto the G3R Rel 9. I have added a new clan and the 'switch-link' is UP UP But I am having problems with machine id. Under the ' communication-int proc-channels' should I specify the new LX as session remote 2 and Machine ID 2? Thanks in advance, R

Thank you all for your replies... I am going to insert a CLAN and configure the LX with overlan. I will let you know how I got on. Thanks, R

Hi All, Is an intuity LX compatible with a G3R v9. I cannot find a document that lists compatiblity between lx and G3r etc Thanks in advance, R

Hi All, Can an IP Phone 46xx with VPN remote software (vpn client) connect directly to any vpn server/firewall or is an Avaya box/ASG needed?? Thanks, rod