Recent content by ratherbhntn

That was it, just needed the F78 and the code and it went right through, thanks!!

I need to forward to an external number that is long distance. Do you have to put in a pause after the number to enter the long distance code or can you just put in right after the number? If a pause is required, how would i insert it while programming on a phone vs. element manager?

Ok, thanks. Looking into routes and sonic walls now.

H323 Transformations is unchecked. We have five SCN's. Some can see locations but other locations cannot see them. Any suggestions?

Yes, I show remote scn in office manager but in SCN Monitor Status it doesnt show active, just stays on starting, can only get ext. to ext. dialing with short codes. Not sure if it is a port on SonicWall or what?

Does anyone know what this error code means? Error Code 4? 1950131mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.2.104 Array Length(10) 71950131mS PRN: ParseRemoteBLF from 192.168.2.104: non-matching lengths? expected=0 len=10 71950252mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.0.14 Array...

Yes but it comes up with four asterisk and will not continue when i hit enter. I cant get past that to re-program. Is there an admin password or some way around this??

Hey guys, I have a couple of 1120E's I'm trying to test. When the small nortel comes up and i hit the four soft keys to go to programming mode it immediately comes up with a box asking for admin password. Anybody else run into this?

Thats what i needed to know, Thanks!

Hey i have some more 1140E's coming in from a customer, if they are running the SIP Firmware and i upgrade them to the 0625C4L Firmware so i can run them on my BCM, will they still be able to use them on the system they came off when i send them back??

Hey guys, well finally i got it working! Problem was with the firmware and by the way getting the latest firmware downloaded almost killed me too! But anyway, with the new firmware i was able to set the port and it connected right up to the BCM. Thanks to all of you for your help!!

gwebster - Firmware is 06A5C39D29, also the New phone that does work on my BCM has Firmware 0625C4L. I dont know but i was thinking that firmware release automatically looks for a certain port that can't be changed is why i cant change it maybe?? I dont know??? Thanks!

Ha Ha Ha, my brain is fried, nothing i try is working, the BCM is just not seeing the phone. No matter what i set the options to i still cant see the Port setting. I've erased and un-checked and rebooted and it still wont bring up an option to set the Port. Frazzled!

I made it to where i edit the options but it doesn't give the opportunity to change the port, its not even on the menu. It's missing a lot of options that is on the new phone. Instead of S1 IP and S2 IP, it has DNS IP1 and DNS IP2. Also the apply and reset button is on the far left instead of...

I finally made it to the programming screen on the 1140e but no matter what i set it up as it keeps telling me "provisioning error" and then it goes back to starting DHCP. I have a new 1140e and it starts right up, i've tried to mirror the old one with the programming on the new one but the...