Recent content by phishe

Here's a start... http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:PIX

Are you sure the recipient doesn't have incoming message size limits imposed?

Yup, you can specify the linksys as the gateway manually or set a scope option to point dhcp clients to the linksys. I beleive the option is "router" in the dhcp options. Just enter the linksys IP and dhcp clients will pick it up automagically.

The reason you cannot access the linky is because you on another network. Hook a laptop up directly to the linky and manually set the IP to the same as the linky. Then point your browser to 192.168.1.1 and you should be able to access it. If not try reseting the linksys.

Internal Network: 10.0.0.0 255.0.0.0 Linksys Network: 192.168.1.0 255.255.255.0 Try switching either internal to match exteral or vice versus. Quick question. With so few hosts on the internal network why is your net/subnet mask set for up to 65534 hosts? Set your network and subnet mask to...

Just a shot, but shouldn't your default route outside be pointing to an external gateway? route outside 0.0.0.0 0.0.0.0 192.168.254.254 1 Try changing it to the outside gateway IP... route outside 0.0.0.0 0.0.0.0 11.xxx.xxx.xxx 1 Where as the "11.xxx.xxx.xxx" is the ip of your...

Can you ping the domain your trying to send emails to?

"anything else w/out needing domain name/static ip ??" ummm, you want to use Exchange for email right? You want "me@mydomian.com" right? ...better register a domain

If you have SP2 try installing it. Exchange will let you know if it's installed or not.

Is your public ip(s) part of this block? __________________________________________ WHITE ROSE INC. NETBLK-CW-208-168-40-A 123 Frost Street Westbury, NY 11590 US Netname: CW-208-168-40-A Netblock: 208.168.40.0 - 208.168.40.255 Coordinator: O'Sullivan, John JO208-ARIN...

Oh, you can change the expiration time and retry intervals for outgoing mail. I have our timeout set to 1 hour. Email sent back to a non-existent spammer will retry every 10 minutes and then give up after an hour. In our situation (25 users) we don't get enough spam to overload exchange...

You sure can, see this article.... http://www.msexchange.org/pages/articles.asp?art=564

Looks like from this document EACH mailbox needs a CAL. I'll be ordering more licenses tommorow... :( http://www.microsoft.com/PIRACY/samguide/tools/cal_guide/exchange.asp

Try: *@*.domain.com This will block all emails from sub-domains of doamin.com hehe, I never thought of that forwarding rule. I'm going to give that a shot!

Exactly!!!