Recent content by nickasch

Thanks for the replies. I thought that transferring may be necessary. I'm just surprised that Nortel didn't implement a feature code to pick up a POTS line on an ATA. Maybe they want people using Norstar phones! :-)

Hi everyone, I have a 3x8 DR5 and an ATA2. If a user on a M7310 holds a call on a POTS line (eg. Line001), how can the user on the ATA pickup the call? I really don't want to have to implement Park here, or transfers, if at all possible. Thanks, Matt

The DN length change went fine. I appreciate everyone's help. Now to get everyone in the office used to the 4-digit DNs! Happy Thanksgiving, Matthew

Ok, so I should increase the DN length from 3 to 4 digits, then do a F983, and start rebuilding the AA, CCRs and mailboxes? Also, will the mailbox no's be 4 digits as well. What about the park codes, 4 digits now after the DN length change? Thanks, Matt

Ok, so now that the consensus is that they don't work, are there any alternative solutions. This is for an existing home, and have no possible way to run copper to this location. Thanks again! - Matt

bkrike, I'm talking about the wirless phonejack without copper cabling. ex. http://www.amazon.com/exec/obidos/tg/detail/-/B00000J08Q/002-1133793-5671252?v=glance Just wondering if they would work with corded norstar terminals? Thanks, Matt

Hello everyone, I was wondering if anyone had connected digital norstar extensions to the KSU using a wireless phone jack system. I understand that it will work if an ATA is used using a standard phone, but was wondering about the digital phones. Anyone have any experience or other...

Does the CP need keycodes if it has only the 10 mailboxes licensed? Our vendor (TDS Telecom) did not give us any of the keycodes.

Hi everyone, I need to increase our DN length from three digits to four digits. I'm OK with the fact that it will add a 2 before all of our DNs. All of our current three digit DNs begin with a 1, ex. 100-120. Therefore, all new DNs will be 2100-2120. However, I'm concerned what I have to do...

Hi, Thanks for the info so far. Acutally, I solved the issue without enabling the Touchtone Gate. I simply created a CCR tree (there was none before), and the default transfer to the operator takes place immediately after the CCR menu plays once. Exactly what I wanted. Thanks, Matthew

Hi everyone, I've got a CICS 6.1 with a CP100 and 8 T7316e sets. We have the CP set to answer all lines immediately. Users can either hit their desired extension or press 0 to go to a hunt group. We have some customers that are STILL on rotary phones, lol, and the time it takes for the...

Hello everyone, I've got a CICS 6.1 with a CP 100. All trunks are copper, and the system is setup PBX style with all CO lines assigned to Line Pool A. I'm having some issues with transferring to an external number from voicemail. I have it set in the CP to use Pool A to use for the transfer...

Thanks for everyone's posts so far. Bkrike, sorry about the T7324, I didn't read the post correctly. I am considering the ATA for the cordless phones, however, if I went without an ATA, how would I wire the cordless set ahead of the 3x8? Could I just use a splitter on a CO jack and do it that...

I was thinking about 7310s for most of the areas, and maybe a 7324 at my desk. Am I missing a lot with only the DR1 software (not DR5 or 5.1)? Like I said earlier, I don't need any advanced features like a CICS, just a system to do intercoms, pages, and use 2 CO lines with. I will NOT be...

Hi Everyone, I've just got done putting in a new CICS 6.1 in at my office, and I was thinking about putting a 3x8 in at my house, now that I feel more comfortable with the Norstars. Here's the deal, I'd like to keep this system as cheap as possible. I've got a few questions: 1) I was...