Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by newteky

  1. newteky

    CTX WinAdmin

    If you are dialing into a CTX with WinAdmin, then did you set up a Dial-Up Network connection in windows with the Name (Exactly) "RemoteCTX1"? If you are connecting thru ethernet then uncheck that box.
  2. newteky

    Win Admin

    If you got that far then IIS and WinAdmin are working. The problem is connecting to the CTX. If you have connected before then the settings should be the same, but double check IP, subnet. Ping the CTX. Make sure the community name wasn't changed. If that doesn't work, try rebooting the CTX. I...
  3. newteky

    Toshiba Strata VIe MIC button

    Had a customer with this system that was installed around mid 1980's. Found programming guide on internet. Problem, 1 or 2 phones have a MIC button that works when using speakerphone. (Button beeps when pressing it, but doesn't lite up. Also does not work while holding it down). Checked all...
  4. newteky

    110 Wiring Blocks -- How to use them

    EIA/TIA 568B allows for a "Consolidation Point" in the data runs. This is probably what the illustrations you've seen are showing. Basically you would run data cables from patch panel to a 110 block. Then run to stations, basically adding a splice point. If I ever used a block, I would put a...
  5. newteky

    CTX100 problems

    Sounds like your Voice mail (Auto attendant) doesn't have that box programmed. The CTX usually doesn't talk to you. What VM system do you have? Could also be a call fowarding problem (to Voice mail). VM Id not set correctly.
See more

Part and Inventory Search

Back
Top