Recent content by n00benduser

ch the feature access code to something else...* or # then a number...change the 80 in the dialplan from fac to ext.

You know, you probably have a bunch of copper trunks that cost a fortune. I bet if you upgrade and switch to PRI trunks you can lower your monthly cost and pay for the upgrade within a year. There are also CLEC's out there that will give you a monthly credit towards equipement upgrades. for...

upgrade to the latest release and Avaya give you ASA for free... If you dial in through a Hyper Terminal seesion, would that work? I would think you would have to turn the lock off on the switch's modem..vgrd.

No, you can buy Avaya Site Admin (ASA) from Avaya

To gain remote access you would need Avaya Site Administration and a valid login.

I thought about it a lil more and thought of a Door Phone...we have a door phone that has a push button that calls a number when pressed. In theory you could disconnect the button, connect the back up gen to the button contacts...then when the back up gen comes up..it intiates the phone call...

You pbx should already have a UPS. Your vociemail is what does the outcalling. What VM do you have? Put both of them on a UPS and set up outcalling. Now the tricky part...how do you get it to call you if there is a power outage. Maybe a analog phone with a speed dial set to a emergency...

do a 'list trace st XXXX' XXXX would be your extention. Then try dialing the number...paste what the trace finds.

newphonedoer, what version release are you on? Do you have any xmobile stations? If you do have xmobile rtu's following this setup: 1. Do a "add st XXXX" XXXX is a extension not in use and doesnt have to be a DID. Enter a regular station type. (6410) Enter in a security code and normal COS...

Do a display activity logs XXXX in Audix XXXX is the ext of the secretary or other ext...

do a "disp activity log" in Audix for one of the subscribers. Do you see mwi-on/off logs when calls are received? should look like this: 03/22/04 16:36 received CA message from unknown extension message counts: new=1, unopened=0, old=7 03/22/04 16:36 mwi-on

http://www.phone-bill-busters.com/lata.htm

check the subscribers voicemail boxes page 2 for the following settings: (shown in bold) fifo = First in, First Out / unfda = undelivered, nondeliverable, file cabinet, delivered, accessed. INCOMING MAILBOX Order: fifo Category Order: nuo Retention Times (days)...

By far the easiest to navigate... http://support.avaya.com/elmodocs2/intuity/Iar51/index.htm

login to your audix and goto Software Management> Intuity Software Display...should be the 1st line item. audixcd...