Recent content by mfutschek

Hello,sjforcum; i've troubleshooted my problem today;now dialin to my switch is succesfull. The problem was at an entry in the Trunk-Group,the numbering-format was set to "enbloc/enbloc" and i have changed this to "overlap/enbloc". A very short change for a great Problem,i think.... Nice Day :-)

ähhm no;i didn't think to do that. So i try it on monday and i hope,i see something on the trunk group..

Hi; i have some troubles to dail to my system from ouside. My system have an E1-Trunk witch 30 B-Channels and all kind of extensions (Phones,modems,fax,isdn). So,the problem is: when i'm dialing from mobilephone or isdn outside to any extension on the switch,that's going on! But when i'm dial...

Guys; i resolved this problem by myself. It's fully working

hi,lopes1211; it's now fully working;i have corrected this entry in the route-pattern. Many Thanks and greeting from Vienna :-)

hi,lopes1211; i'm dialing outside of the pbx and i have an ISDN-PRI out. And i think ,my provider supports 64k SDS,because i have tried this PRI with an E1-PRI-Card from a Cisco-Router,so that was succesfull.

Hi; i tried to connect an isdn-pcmcia-card(eicon-diva) to a tn556d-module. So,the wiremap is ok,a L1-link and D-channel is up. AND HERE IS THE RPOBLEM: when i'm trying to dial each number with each software,the B-channel is up for a few milliseconds and then down.Sytem is G3V6. I hope,i've...

Hi; i have some little questions for the DS1-Card (TN2464): On the first Page for the Trunk-Group;waht does the TAC-Field mean? ...and... Does an userguide exists for thsi Card? THX! mike

Hi; i want to connect a Cisco-7206-Router to a DS1-card (TN2464). Both links are physicly up,cabling is okay. So,my question is: Whitch parameters are necessary to configuring the DS1-card? My system have a TN790B (G3R6) P.S.: i hope,anyone understand this,because i'm training my...

Hi,CJH; Your tip was very helpfull; IT's WORKING NOW:-)!! THX! best regards, MF :-)

hello,i'm sorry; it's not the billingnumber; it's the main number,that i'm seeing already without an extension from my system (e.g. on my mobilephone). But with the statement "change isdn pub...",which parameter turns on to send extension-numbers out?

HI,i want to use an ISDN-PRI with some B-Channels (6 or 8) for a cisco-7206 with an integrated E1/PRI-Card for dialout-services. My qestion is: is it possible to make a Trunk with 6 or more B-Channels and assign one extension-number on this Trunk? I have many DS1-cards and a TN790B-Processor...

hi,i'm using an ISDN-PRI-Trunk an a DS1-card as line to outside. So, my problem is,when i'm dialing my mobilephone from an extension, i only see the billingnumber on my display. Can anyone told me,which steps are required to display it? My system is a G3V6/with a TN790B-Processor and the...

hi, thanks! I'm trying this tomorrow. :-)

ok;that's no problem; my definity is in austria. But this is not the answer of my question..