Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Meridian1Tech

  1. Meridian1Tech

    How reset a port on NuPoint640e rls 14.1 ?

    We have NuPoint 640e rls 14.1 (NPUM)... The port is in "unknown_state"... I would like to reset only this port ! Thanks in advance for your time !
  2. Meridian1Tech

    There is a way to see number of a user speedcall in sx-2000??

    Finally, I have the answer !! And it's working fine for me. I will try to resume the process (my first language is french then I'll do my best). You can perform a datasave ( then you have a database "update") 1. In the sx-2000 you need the ftp user and password (normaly use for OPS). You can...
  3. Meridian1Tech

    There is a way to see number of a user speedcall in sx-2000??

    Thanks for reply quickly... There is the situation, we have 4 SX-2000 (LW 33.3) that we replace with ICP 3300 (MCD 4.0). Our provider did not use the "software conversion" because they had bad experience with it ?! Then what we do, is to print all forms from the SX-2000 and use the principal...
  4. Meridian1Tech

    There is a way to see number of a user speedcall in sx-2000??

    We convert an sx-2000 to ICP3300 Mxe, then I would like to retrieve the user speedcall of each phone... I don't find any form where the number are store. The only way I can see them, it's with OPS Manager... ops can read them ! But it's one by one and is very long... Somebody have an idea ...
  5. Meridian1Tech

    WAITFOR "dialtone"

    Thank you guys for your time... Finally, I found that I can put a # at the end of the number: transmit "atdt *3324748,20750#^M" and then the phone system don't wait, the feature is activate right now! Jean-Pierre Work with MITEL system now (Meridian1 before)
  6. Meridian1Tech

    WAITFOR "dialtone"

    Hi,I have here a very simple script : proc main commandmode on pause 2 transmit "atdt *3324748,20750^M" pause 15 hangup pwexit endproc The script is use to activate "Call Forward" on the phone... when I do this manually with the phone, I dial and I wait for the dial tone return, and...
  7. Meridian1Tech

    How can I change model of a phone?

    Thank you to all of you guys! The way I find (with your help)to resolve my problem... With NRU, in the maintenance, I find the port of the extention, I disable and re-enable it, and the system detect the right model automatically. That's it That's all. Thanks again ! Meridian1 and Mitel...
  8. Meridian1Tech

    How can I change model of a phone?

    I already try with user pref. in NRU but the model field is not available, is gray, I can't change it. I look for other number (not use) and the field is white, then I can change the model. May be there is something to do before the field be available?? Meridian1 and Mitel tech.
  9. Meridian1Tech

    How can I change model of a phone?

    The problem: I have M7310 phone (ext. 21225) connect but not working properly. When I look into the config, I realize that this ext is configure like an M7208. Anybody have an M7208... What I would like to do, it's only to change the model. Is it possible to change only the model, or if I...
  10. Meridian1Tech

    How deactivate feature code with the modem line?

    Thanks Knob for your time. I have now something that working for my "application". There is my final version... ;MW clear for all Poste Mitel proc main string MWLoff = "#43" integer num1 = 20101 string poste clear while 1 COMMANDMODE ON pause...
  11. Meridian1Tech

    How deactivate feature code with the modem line?

    Yes, you have exactly the idea... My problem is to transmit the phone number. I can pass it string but not integer. What I have to do exactly is: -have diatone -dial #4320000 -dial #4320001 -dial #4320002 ... My idea is to create a small loop with "#43Poste" and increment the phone number...
  12. Meridian1Tech

    How deactivate feature code with the modem line?

    I'd like to use script to deactivate feature code using the modem line. What I need to is a loop (while or for-next)... I give you an example in "my word" : x=20000 ;my first ext number ;I need to go off-hook WHILE "dial #43" x IF x= 29999 THEN ; 29999 is last number...
  13. Meridian1Tech

    How re-route DID number to an other switch by TIE trk?

    Now... the answer!! One of my contact find the problem. In the configuration of the "rout 16" (where incoming DID), the "NCRD" (network call redirection) should be YES. Thanks to everybody for your precious time!! Meridian1-tech
  14. Meridian1Tech

    Call Redirection by time of day (Meridian 81c)

    What is 6001 beside the CFW Key ?? Mail agent?? Meridian1 tech
  15. Meridian1Tech

    How re-route DID number to an other switch by TIE trk?

    Here, some info. printout: trk-trk transfer: TYPE NET_DATA CUST 0 OPT AC2 CLID ISDN PNI PINX_DN HNPA HNXX HLOC LSC RCNT OCLI TRNX EXTT FTOP ftly NIT FOPT ================== DN's set: DN 2327 TYPE CDP STCD DSC ================== DSC: FEAT cdp TYPE dsc DSC 2327 DSC 2327...
See more

Part and Inventory Search

Back
Top