Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by MauroB

  1. MauroB

    Billing system issue with CDR

    Hello, You need to config the dialed-num and the calling-num, they will be the external caller or the internal caller based on the value of the param cond-code . Check the System CDR documentation about the explanation of the cond-code .
  2. MauroB

    Ipoffice Webrtc API

    Hello , I downloaded thfrom Avaya DevCONNECT the zip example files for develop a webrtc client , audio calls are working good , but I'm not be able to make video calls , from Avaya communicator their works . I found a doc in Avaya knowledge base talking about the only video codec supported is...
  3. MauroB

    softconsole 1.5.3

    Hi , You can obtain infos into the line above the call appearence , and into the box to the right of the call appearence . For to do that You need to map the extension number into the directory settings ( using the master directory program ) , I tried configuring the station in this way : Name...
  4. MauroB

    CDR capture via TCP/IP on Linux host

    Hi guys , I'm intested about the script You did , but I thought that could be more interesting load the cdr datas into a database table ( could be MySql ) , but I'm a Linux Newbie . What do you think ???
  5. MauroB

    CDR capture via TCP/IP on Linux host

    Hi guys , I resolved my problem , it was only my firewall on linux box . When I opened the tcp port it worked good . Thanks again Kerchak !!!
  6. MauroB

    CDR capture via TCP/IP on Linux host

    Hi Kerchak , I did what You explained on the top but when I perform the stat cdr command , the cdr1 is always down ??? I did it on a Definity G3si R11 . Could You help me ??? Thanks in advance
  7. MauroB

    line key

    Check on the User telephony tab about the ringing appereance , at bottom right .
  8. MauroB

    IP Office conference bridge question

    Hi , Have You the VoiceMail Pro Sw and License ??? If You have it , You can set a lot of features and check pins with different digits too . You can send an e-mail to the conference admin by VM Pro for each guest coming into the conferce . If You need infos , try to find that into the Ip-Office...
  9. MauroB

    Multivantage and IP office

    Hi , You have to config an Ip Trunk on MV and fill the ip office ip address in the far end ip add sign group parameter . Then , into the ip office tab Lines add a new line in the Line - Voip tab fill the MV Ip address . That's all .
  10. MauroB

    making the station number visable for the called person

    Hi , You have to change isdn public and fill extension statrt number , extension lenght ,the local office reception number and the total lenght . Try it !
  11. MauroB

    Okay here is good routing question

    Hi , You can try to change isdn public o private command and fill the right parameters , otherwise You can set to f the supplementary service protocol in the tie trunk on both pbxs . I hope this is helpfull . Mauro
  12. MauroB

    Problem on Voip dcs trunks

    Yes, they are. Something more ???
  13. MauroB

    Problem on Voip dcs trunks

    Hi , Yes they are the same . I checked about : The codec , the trunk config , the sign groups , the Ip-Net Reg. , the ip-hairpinning and ip-direct connect. All the parameters are the same . On the si rel 9.5 ( the first case ) I tried to connect to the lan a csi rel. 9.5 , everythings works...
  14. MauroB

    Problem on Voip dcs trunks

    Hi, Could someone help me ??? I have to customer with definity and prologix differents platforms and sw vers. 1 - two definity si connected with an Ip trunk , one is rel 8.4 and the otherone is rel. 9.5 . The problem is when I call from the rel 9.5 to rel 8.4 I heard a very high volume ring tone...
  15. MauroB

    ISDN E1 to T1 Interface problem

    Hi, Could You try to chenge the idle code in ds1 form from 11111111 to 01010100. This the idle code used in Italy for the a-law companding on isdn pri configuration.
See more

Part and Inventory Search

Back
Top