Recent content by Lancbar

Great information. Thanks for answering my questions.

I have a question about channelized T1. Can you group individual channels into larger individual groups. Example: 1 channel = to 64 kb 4 channels = to 256 Kb 8 channels = to 512 . . 23 channels 1.544 Mb The question is, is this possible and what situation would this be used for. Is it...

Never mind, I enabled autoboot and that solved the issue. Thanks. Lance

Hello, I need to gain access to an HP9000 server. Is there a way to access the unix prompt through the Secure Web Console that is accessed via HTTP through the Web Console port. I don't have the IP address of the Lan adapters to telnet into it. Thanks in advance for any suggestions or...

I need to setup redhat 7.2 as a nntp server. Anyone know if suck can be used to populate a windows 2000 server set up as a news server? Thanks , Lance

I'm having a problem with the Windows 98 vpn client running vpn client 3.1 browsing the internal network through the pix firewall. Once establishing the connection I can ping internal addresses as well as Wins resolved addresses. The problem is that I can not find the computer using netbios...

Anyone know of any software that can easily create snmp agents to send traps as well as trap monitoring besides NET-SNMP.

I need a snmp utility that has the capability to create and destroy tables. Does anyone know of any that I can download for free?

I'm using manual backups for now. My backups with compression have been taking me about 9 to 10 minutes (6MB per second) with datasets of 4 gb. I tried doing a backup with no compression and my throughput doubled to 12. Now I need to figure out what I can configure to increase the compression...

Right now I am just doing a local backup using a Quantum SDLT. I tried both hbn and cbn and they both seem take the same amount of time for backups. The dataset I put together is a mixture of word documents, jpg, and mail arhived items. About 4 gigs worth just for testing. Do you know if there...

I have a Ultra E 450 Solaris 8 server running Legato Networker. I am using a SDLT tape device and I have configured the st.conf file as indicated by the manufacturer of that device. When I run a backup I am only getting about 6 mb/sec. I have heard that I should be getting around 11 mb/sec...

Where can I find the total elapsed time and average throughput of a backup and restore on Legato Networker? I checked the /nsr/logs directory and it doesn't seem to have any logs that displays the average throughput.

Are there any tunable parameters to increase SCSI throughput in solaris 8? Thanks for any suggestions.

I don't have the command available. I guess it is safe to assume that my machine is setup in a Non RAID configuration. Thanks for the help Lance

Carlos, I am running an ultra e 450. Solaris 8 was already installed previously. DiskSuite or veritas LVM are not installed. If I do have to reinstall the OS, is there an option during setup to configure the RAID level or will I have to get other software? Thanks, Lance