Recent content by kizo

What phone do you have, SLT or APT? For SLT phone you need to set 628 SLT Caller ID / Enable

It is the last version

It was sent!

https://drive.google.com/drive/folders/1z-K1U4S1r8fKMr7hP_uG5oGmrA970U9V?usp=sharing

You need to create rules on Mikrotik/Firewall Signaling ports 2427, 2727 and 9300 forward to IP adress of IPC MPR RTP (Voice) ports 8000-12000 forward to IP adress of DSP

I have a one unused NCS3716 (16 SIP ext) key for NCP

If you activate HEADPHONE MODE on the phone (PROG / 61/ ON), the message will be played on the Headphone port. Then make a audio cable adaptor 2,5mm to 3,5 mm and connect into audio input of your PC. Us some audio recorder app , start recording and start playing OGM

Should have done, you can add 3 pcs 24-port cards. TDA0105 is not for TDE :unsure:

How many EXT cards do you have and which ones? I'll try it on our model.

TDE200 with PWR-L supprots 168 EXT (w/o DHDP) 8 EXT cards, but max 5 MSLC24

WAV file format saved in KX-NS PBX is as follows. G.711 , Mu-law , 8bit , Mono

What does "Error log" say ?

DSP determines the number of simultaneous connections, which depends on the codec, the connection between the SIP phone and the DPT/APT, and the SIP lines. Read the Feature manuals

You have four Ring tones for DPT

In attachment If you use DISA numbers 1-4, set other numbers ( 0, 5-9 ) on the operator or on an empty DPT or DXDPT port ( for disconnect call)